Hi so when I pored into the Diamond miner it was a couple inches away from filling up the Diamond miner I stacked for Runs into it so I’m sure it’s saturated when I left it over night it reached 15 psi when I connected it to the bar it went up to 20 I’ve vented it to 15 for 2 days but I still see quit a bit of liquid gas in there should I be waiting a little for it to evaporate down befor I clamp it down
if you’re SURE it’s saturated, why would you want to loose more solvent? (not saying you don’t, asking you to THINK about it and EXPLAIN your logic…)
hint: it speaks to saturation…
if you really want to wrap your head around this,
7 Likes
It was actually that video that inspired me to do my latest experiment, a simple butane re x in a miner, and its going quite well
6 Likes
Butane reX come out clean but tend to be the hardest to turn into loosies
3 Likes
That explains alot, they are definitely holding tight so far
1 Like
10 of these for sale, new in box. MSRP $1,300, Sale Price $300 each
1 Like
Hi I’m trying out your tech with the Diamond miner i have when you do your poor are you print it into the Diamond miner when’s its more of a liquid or when it’s more sappy I pours mine as a liquid it’s still has allot of butane gas liquid if only vented it to 15 psi the last 2 days I’m I dooing it right also i did connect it to the heater and set the temperature at 70
1 Like
Raise the temperature a little bit and vent more frequently
1 Like
wow thats clear
1 Like
How long do you freeze for and at what point do you decide to freeze it?
I have also done this. I have found the same numbers on melting points. I have found at this temp it takes several hours to fully activate.
Pour your run evaporate off excess butane
Then place in a -60 deg freezer over night is plenty of time. Then bring out to a cool room 68deg.
2 Likes
the msrp on these things is crazy we got a whole bunch of them from precision before i started digging into building my own and you can part it out on glacier tanks for a fraction of the cost haha 300 bucks is a good deal forsure
1 Like
going to give my first go at a pentane rex in a miner similar to the ones @Waxplug1 uses, I’ve been doing rex’s in jars for around 6-8 months now and feel pretty good about them. I dissolve at 1:1.5 THCA:Pentane and reduce to about 1:1 then seed, was wondering any major differences to be aware of/any tricks of the trade anyone is willing to share, thanks!
4 Likes
Use flat bottoms and build a seed grid if using pentane. Redissolve the isolate in a separate vessel and add slowly into the miner to not disturb the grid.
Use round bottoms if using butane to prevent the formation of a puck. The round bottom prevents pucks from being able to form. Drop a seed in through the 1/2” port by placing the seed in the nipple and cover with your finger to create a seal so that you can open the valve and drop the seed in without offgassing or messing with your current saturation level.
If you need miners I got both flat and round bottoms in stock.
Good luck and the only way to learn is to loose so if you fuck it up, that’s a good thing. Learn from it, redissolve, and try again 
24 Likes
When you say “Low Pressure”; what is a good pressure range you’ve had success with (in PSI terms if you can please!)?
won’t see him no more
1 Like
He hasn’t logged in for over a year. Liklihood of getting a response is pretty slim.
If you you ever want to see when someone last posted or logged in, you can always click on their avatar to see, just in case you wanted to look before replying to old posts.
1 Like
Did you read the whole thread?
If not I suggest you start there.
Do you understand that you’re trying to mimimic what is going on in a canning jar, and can be achieved in a pyrex pan?
Either way, I suggest you next read : Pryrex pan diamond tech?
You NEED evaporation. not pressure.
Thca crystals are not carbon crystals.
2 Likes
I just wanted to post the 420th post.
How much did that miner cost ya? Is it connected to a closed loop?
2 Likes