aside from wayyyy higher heat transfer efficienciesâyes, other industries have broken enough shit to know thermal stress is a real phenomenon
6 Likes
I assume weâre talking about an angry Australian, red-haired rabbit?
I have a Subzero Scientific 2lb extractor that I converted into a 5lb extractor. Iâve been using it for 5 years now and have nothing but good things to say about their systems. They are very expensive though, but worth it.
1 Like
So tell us the good things about itâŚ
What makes it a rig you like to run? If itâs the only rig youâve run, pointing out how it is better than the other guys might be difficultâŚis there anything you would change?
Pictures? Subzero doesnât make hydrocarbon extractors these daysâŚ
1 Like
And here is it hooked up to the hot water system. Def still needs some tweaks, but we will get there.
Credit to @FicklePickle on this design.
6 Likes
@Cyclopath sorry I should have been a bit more specific in my reply. I love the quality of the system, it still works as well as the first day I used it. Iâve only had to replace a pressure gauge in 5 years of use. I also like the simplicity of system, after a few runs I felt like a pro using it. One thing I would change is how the solvent is introduced into the material column. With this specific system I have to lift and turn the solvent tank upside down and clamp it to the material column. I would instead like to leave the solvent tank on the ground and have a hose transfer the solvent to the top of the column. For me, I usually like to process about 20lbs per day and this system allows me to do that while producing a quality extract (shatter, crumble). And yes, it is the only system Iâve ever ran so I couldnât say if itâs better than others but I did want to point out its quality and ease of use.
1 Like
Thank you.
YepâŚthat picture shows my biggest compliant with the subzero designâŚthey never really got past jabbing a can of butane into the top of a glass tube.
Some of the systems they released into the wild were truly bizarre⌠failure to comprehend imo.
6 Likes
Wtf so the whole weight is on one clamp ??? Damn
6 Likes
You should have seen their bigger systems circa 2015âŚ
edit: not their largest system
(but is 2015 vintage)
@kloudkick3r itâs pretty simple to move the solvent tank back to the floor where it belongs. a 3/8" hose and a couple of tri-clamp parts should do the trick.
9 Likes
Wild very wild
Thanks for the lead, I Talked to the owner of N B Oler today. I must say I am impressed with their customer service and team. However, A system from them with the same capacity as the PX40 has to be custom built, and will cost between 250-300. I would love to buy from them Iâm sure itâs way superior in quality compared to Precision, but their lead time on a custom build of this size is 22weeks. That may be a deal breaker for me. The Precision is In stock, one week lead time
1 Like
Talk to people who operate the gear before purchasing if possible!
Single solvent tank. Single collection vessel. 350# solvent capacity room required for its installation. So no âstandardâ solutions (typical 150# limit with an MAQ doubler if you have fire sprinkers only getting you to 300#) work out of the box for your extraction room. All eight NPT ports in a row on top of that tank.
2 Likes
The entire weight of the solvent tank is on one clamp, yes. The solvent tank when filled with 14lbs of solvent weighs 40lbs. Been doing it this way for years, never had an issue. I am definitely ready for an upgrade though, Iâm thinking a 20lb to 40lb system next.
1 Like
@SamuraiSam Great point. I figured Iâd âonly fill it to 300â But youâre probably right. Bet They wonât even allow the install!
Anybody know of a cool engineer to do a field verification in SoCal? Theyâre not gonna show any leniency after the LA fireballâŚ
1 Like
Fire marshall does not care how much solvent is in the tank
They rate your certified system by the capacity
If you have a system with 350lb tank and room of 150lb capacity you do not get to (legally) bring that system into that room. The custom machine that saves you 20 weeks of time in âbeing in stockâ might cost you 6-12 months of building a custom room to fit the machine.
Do more homework before spending money. Donât buy a system without considering the extraction room it will live in. Talk to an engineer see how long it will take to have your room built. I canât tell you how many times Iâve seen people rush to buy buy buy instead of plan plan plan.
6 Likes
So true. Thanks brother
1 Like
That and a dip tube. Which he could order from glacier tanks and cut to fit!
2 Likes
doh! yep, I totally missed that lack of a dip tube was what was holding @kloudkick3r backâŚ
in my defense something like this 1/2" compression fitting would probably solve the custom dip tube. .
(not suggesting PEX with hydrocarbons, this was ethanol. the crossfit bares sharing imo)
2 Likes
Does the pex follow all the way through?
not in this install. the fitting is drilled through. because it is installed using an oring not a permanent set of locking ferrules, I could use this particular toy as both a diptube and not-a-diptube. here it is not a diptube.
the pex was way easier to prototype with.
2 Likes