I just cringed watching that. Never listen to @Killa12345!
13 Likes
You probably just caused this cart to want to start leaking.
3 Likes
For science!
2 Likes
6 Likes
Basically lmao. 
4 Likes
Are you going to get it tested for metals after? This won’t tell you a whole lot otherwise
2 Likes
My nose dripped watching that
4 Likes
Yeahhhhh my nose has been dry past few days cause the wind here so been using Flonase, dAmn dry itchy nose 
But yes plan to have tested
4 Likes
I am on holiday till 6th. But i read posts everyday. have passed on the battery voltage advices. @Baked-All-Day
2 Likes
72hr due？
1 Like
Update for 72 hr
Cart is still intact, little bubbling from flipping it around to see if it has leaked which it hasn’t. So far so good, no oxidization of terps from leached metals either. Good sign. When I pulled the bottom seal to see if it had leaked it pulled a draw on the cart & bubbled through, no clogs of coil which is great but not surprising with terps. On the cart I’ve filled (air flow) I use the preheat setting occasionally just to have a hot coil to run which is nice. I let my wife hit the disty cart today & she regretted it instantly as she doesn’t take big hits & after a coil preheat, you get a fattttt cloud.
So far I’m impressed by the carts, I’ll hopefully be getting a run of some super thick disty done today & we will really put a test into action. I’m also going to rosin fill one too.
4 Likes
I filled a Ducore 13.5 cart w/~91% disty. I had a heck of a time getting it to cover the inlet holes. I heated it up over and over. I finally did get it to where the disty could absorb but had a heck of a time. It would fill the entire cart but stop at the edge of the inlet holes as if there was a rim or something preventing it from covering the holes. A perfect outline of all the inlet holes. I know this is a common problem sometimes, but it was just weird. I’ve never had that problem with the 11.5s or 13.5s. Thanks for running the terp test btw.
2 Likes
Fill with warm disty but pre heat the cart as well, it’ll flow in easy then prime the cart without firing the coil, ( draw on it with air or vacuum) this will ensure a always fresh hit off the bat.
3 Likes
Warming the carts, duh, now i feel stupid…thx brother…it’s the simple things.
2 Likes
Everyone always has a different way of doing things, I figured this out from building rda’s when I vaped lol, plus it’s basic things that make the product better for the consumer, get a air diffuser multi manifold for 1/4 line set on a small diaphragm pump, it’ll be a way to prime multiple carts especially if you make multiple t manifolds.
2 Likes
What do you think of the carts? Primarily the larger diameter? I passed some of the disposables around as well as the refillable carts. I’m hearing that they all want adjustable airflow control. I don’t know why some have it and some don’t. He said they want to give people choices. I can understand that. However, the 15.5 can go through a cart-full pretty quick if you don’t watch yourself. Like driving a gas guzzler car. They’re fun to drive, but they will go through a tankful of gas in no time.
1 Like
How large is the aperture? I just got the ccell dart samples and they RIP so damn hard and they even run really thick cured resins (liquid diamond style, no disty) anyone else been playing with the new ccell pods in all their forms? I know DAF is running the pike, and they even have a model with a 1 gram pod for all you environmentalists 
all in all the pods are great but the new larger batteries really seem key as well.
I like small factor but the coil does a nice job thinning the sides as it flows in. So far the disty cart I haven’t had problems yet, which typically by this time others clog
2 Likes
Oh, I care. The eJuice does not come out of clothing ime. And it does not feel nice to have it all over your mod. It ruins the entire experience.
I have had carts filled with decent oil I personally made, only to leak and ruin the entire thing. My tolerance is so high that my sensitivity to the entire experience has heightened.
I am playing with PCKT carts at the moment and the inlets are too small for my shatter carts. My oil is THICK. I don’t want to decarb.
I even wanted to go inso far as to create a cart that was for my particular style but I don’t know where to start. All I have is conceptual drawings.
1 Like
Our aperture is quite unique，it is not ordinary shapes. each “hole” is different from the other.
overall it is larger than CCELL
2 Likes