What does leaving powders soak do better or worse ?
Greater contact time = greater adsorbtion efficiency
There is speculation that certain adsorbants reduce yields on cannabinoids and their selectivity begins to broaden with increased contact time. While this may be true, I have yet to see empirical data validating it.
Using too much yes.
hahaha, totally agree! Itās a versatile extractor but I was thinking the exact same thing
ive only weighed one run but Iām about to start up again and Iāll test more but 1500g powder run it gained 45gs.
I have a theory that doing a hot loop bypass to build pressure and put some fresh distilled solvent to rinse through the powder may help flush any stuck oil out. Iāll test this and report back
Possibility the adsorbants are adsorbing undesireables like water and pigments?
Yea definitely pigments. Didnāt think about water from the atmosphere. When I weighed it right after my run it was a couple hundred grams heavier. Thatās why I think a flush of clean solvent will help with getting any last bit of stuck oil out.
Either way in the end my return % is still good and my colour is maybe a bit to clear.
Anything over 2:1 powder to oleoresin has just been too much for one reason or another depending on the adsorbants in use. Either flow, loss without rediculous flushing, or having to limit my run size based on the amount of adsorbants in use.
Yea I find 2kg/1kg oil works the best for speed/colour remedy
I use 75grams of b80 per oz of oil expected
Interesting enough. Thatās about the right ratio for media. For approximate yields.
I got that number from using a mini ice scooperā¦I never weighed it I just added scoopsā¦based on just observations I noticed when it was too little or too muchā¦been using that scooper sinceā¦I just recently decided to weigh it
I use a small mason jar, lil 4oz one for measuring. I still donāt weigh either. I just use 4 parts of each and it worksā¦ I did it for a repeating and was asked for it
Ya, im lazy i use a 1/4cup scoop
Are you guys going for water clear? Iām told to make it clear/yellow. 75g/oz is about 700gs more than Iām doing
Yea I do, for the most part. If a weensy bit gets through I donāt fret much.
Hey all. Iām going to be opening sales to the public pretty soon for our new BHO C.R.V.
- Agitation, no motors
- Temperature control
- Safe and controlled addition of adsorbants
- As large a volume as you need, initial models will hold about 55 L
- Can accommodate both color remediation and dewax processes in the same vessel
- easy and fast filter cleaning and replacement
is that anything like a Honda CRV?
lol sorry bro I had to take that opportunity
Whenās show and tell? I should be back on that side soon.