Distillation of dmt and mescaline?

A similar thing can be done with mesc. FASA is added to np holding freebase mesc to precipitate mesc fumarate. Suppose this could be done in limonene as there are mesc extraction teks for it.

2 Likes

Short path distillation of cactus extract does not sound fun. But concentrating by alcohol washing dried cactus does sound doable.

Hypothetical non A/B cactus extraction:

  1. 70% EtOH + dried cactus (maybe add HCL since we know mescaline HCL is soluble in EtOH)
  2. let extract with agitation, low heat, ?microwaves?.. for 6+hours?
  3. decant/filter off liquid, repeat extraction 3X
  4. combine liquids and filter well (maybe DE?), evaporate EtOH to yield cactus tar

So at this point you would be left with black/greenish tar, definitely mescaline in there, other cactus alkaloids, some mucilage compounds, lots of chlorophyll and sugars, probably a good amount of lipids/cutin-waxes. What you really dont want are the lipids/waxes as they are known to make you sick (why it is traditional to remove the skins). Mucilage is also probably not so good for digestion.

Acetone will dissolve away lipids/waxes and chlorophyll, leaving mescaline alkaloids and sugars (not sure about mucilage).

Hypothetical clean up of the tar:

  1. Heat tar and dissolve into small amount of warm EtOH.
  2. Add acetone at ?10x? vol of EtOH
  3. Chill to freezer temps, pour off acetone, wash 2x w/ cold acetone
  4. Collect mescaline and associated alkaloids + cactus sugars and whatever mucilage

Cactus chips to simi-concentrated mescaline tar… Very hard to scrape, very hard to handle, not good smelling, not anywhere close to a good A/B salt… but soo much better than drinking cactus snot.

2 Likes

I have been experimenting with a “microwave pressure cooker” just a domestic type off eBay
It is only capable of approx 3 psi so pretty far off the conditions set in the literature for MAE
I have been seeding some possible polymerization of DMT from some materials we get quite a few oils from Australian acacias at times but with over exposure to microwaves known crystal forming material will oil up
Have not tested on cacti as yet
I don’t have all my lab notes but it is interesting and deserves more investigation my current process is to load the “reactor” lol with biomass and hot acidified water at a 10-1 ratio by weight and microwave at 450w for 3m wait to cool down then decant and run another cycle with fresh water
I cannot remember if I have posted this on the nexus I may have or was otherwise intending to
Still inconclusive

So irridation time would depend on your materials screened mesh mine is very course fibres generally if you were utilizing that nice powder stuff they sell in merica you would have to reduce your time

Recently I let a friend who has been extracting DMT for the past couple of years use my shop to do his extracting. After seeing his process which seems so inefficient and wasteful! I am determine to streamline his process using some spare stainless steel parts and ball valves i have lying around.

Just curious if some of the same principals used for running a CLS can be applied towards DMT extraction?

Photon has said he tried it

3 Likes

chemical synthesis seems so much easier and more straightforward than whatever this is supposed to be

1 Like

That debatable, whats required to synth dmt and can regular folks get all the ingredients?

Also what about the wooks who are too incompetent to follow a recipe?

They’ll probably take their own liberty with the ratios of reactants like we’re seeing with D8.

Stoichiometry was dead in the 80s bro…

2 Likes

Dude gmo concentrate smells exactly like deemster. It’s crazy.

7 Likes

tryptamine (can be made rather easily from tryptophan which is dirt cheap and readily available), formaldehyde, sodium borohydride, methanol

8 Likes

Damn i just looked it up that is very easy…

Thank you!!

If anyone needs an SOP for that, DM me.

4 Likes

Right! I wonder what’s in it

1 Like

I’ve never tried mescaline. I’m still very curious and open to it though.

3 Likes

Better than shrooms imo, much smoother. The feeling is more akin to mdma than psilocybin.

You can buy a foot of San Pedro off eBay. @GroovyOctopusLabs

3 Likes

I always say there’s two types of people on this planet: those who can handle their Acid and those who can handle their Shrooms. I can micro dose on Shrooms and have a very easy and smooth ride but I take that 8th and introspective journey’s are a bitch. I’ve done so many of that too. I am way more of an acid kind of guy if I want to trip. Every time I have done acid it’s consistently goofy and pleasant. I always feel as though I’m experiencing life without the viel over my eyes and I experience life in such a very positive light and I feel like I’m one with myself in a way that I should’ve been born as such. Awwww man I’m tearing up a little. I would’ve been the perfect acid experiment for the original tests and I know it, my brain is so ideal for what it does and I wish it was medically available.

5 Likes

He just sucked and had shitty bark I have 2-3% bark now made a few small pulls got 15grams off 1kg and I have about 4 pulls left to get it all

DMT is better than them all imo for visuals

3 Likes

Cadillac of psychedelics, good stuff, be prepared to barf though… no shame

3 Likes