Holy explosions batman. Thats the biggest open blast column ive ever seen. There is a reason we dont do that anymore
8 Likes
what plastic thing there is no plastic in my setup?
the 2008 picture you posted…never seen one of them…and ive seen a lot of contraptions.
4 Likes
i have a friend with a home made rack he has 6 of these things to it
1 Like
He’s talking about the hand vac pump
looks like a really nice rack and some really nice pieces…all you need is a nice collection tank and you can do this safely without the fear of burning half your skin off.
Its a dope start.
have you tried to flip your gas tank yet???
4 Likes
i did flip it to see maybe upside down is unnecessary but it didnt do anything
it looks like i stripped one of my connections so i just been using the red side is that part of the problem is it expose to come out the blue side i was reading on the net and i thought i read it does not matter
No body is gonna say your rig won’t work.
We are concerned for your safety, and that of your neighbors.
There are safer ways of performing this trick, and cannabis extraction is hyper-scrutinized by fire Marshall’s everywhere because of the disasters this sort of setup have caused.
Open blasting should not be a production game at this point. It reflects poorly on all of us
15 Likes
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F281866424499
Get these and you will stay nice and unburned.
8 Likes
i do not advise people do shit like this its stupid and dangerous thats why i never wanted to post photos on here i dont want anyone taking steps backwards these were my choices and yah i probably should del these from the site i dont want anyone getting ideas i just watned you guys to understand my sytem but i dont condone this behavior what so ever please do the opposite of me if you read and see my setup this is not coolio!
i got the 2x 10" clamps for $190 shipped. can do all those better too. Just saying…
4 Likes
is there a specific temp i should look for with my laser gun for the best flow of butane?
its your life…its up to you to choose…we just wanted to see if everything is hooked up correctly…not to condone you! We are here to help. it looks like your running a deceit amount of material which means you have a few bucks to invest. we are merely looking out for your safetly bro.
9 Likes
will pressurize anything over 33F or something.
3 Likes
We just needed a better idea of what you were doing, sometimea a pic is worth 1000 words.
Your solvent isn’t moving because at low temps butane dosent have any pressure. You will either need to use room temp gas, or push with n2 gas if you need to do the extraction cold. Your tank has 2 sides to it, a vapor port and a liquid port. you will inject the solvent useing the dip tube side of the tank, and recover useing the vapor side of the tank.
Replace any damaged equipment, thats an accident waiting to happen. Be safe, and try to upgrade.
2 Likes
does this apply to the falmeking #30 or is this only for propane tanks
do you guys bleed your solvent tanks like this guy bleeds his propane tank
or is this just for propane
because i never herd of bleeding your solvent tank maybe i missed that part?
So is it stalled in the column or in the tank? If its still in the tank…your ok. If its stalled in the column…you’ve got yourself a problem. It looks like it only made it partially into the column. How did you pack your material?
1 Like
on this run i did it lightly
1 Like
I remeber getting my lid off you and how much safer I felt going from a mk3 lid with no sight glasses and playing fucking peekaboo to feeling safer than holy hell. That’s just a lid change
5 Likes
The only bleeding you should do is burping inert gas or air off your tank.
you need to push with n2 gas or raise the temp of the tank inorder to allow the liquid to be pushed out of the tank. What you essentally have is a spray paint can full of paint with no propellent left. How would you get the paint to leave the can? pressurize the headspace.
8 Likes