Ultraviolet Fluorescence of Cannabis - Observations

Your best bet is going to be buying a UV lamp capable for going from 265 nm (common wavelength in flash chromatography systems) to 305 nm. These wavelengths are used for TLC and can be helpful for LLE visibility.

4 Likes

I have a UV-C light for sterilization. Looks like it is specified as 254 nm. I forgot I had that.

3 Likes

DO NOT! Expose skin, eyes, pets, or anything that has living dna/cells when working with uvc. Uvc will seriously fubar your life and plants up.

I make custom uvc boxes for growers.

I made some spider mites dance in circles in a baggie while I exposed them to direct uvc light (in a ziplock on a leaf).
Was actually funny looking at them after.

5 Likes

100% yes. UV is no joke when you start playing around with light stronger than something like a simple counterfeit bill detector or pet stain detector. Eye protection is a must when using very strong sources of of UV. You wont see very many blind people making extract.

4 Likes

Maybe this is relevant for the CRC tech that’s going around. The green fluorescence that I usually see in extract that’s been partially processed is totally stopped by neutral pH activated alumina. Whatever it is, it has crazy high retention in my little micro column. Mobile phase 99 percent iso.

3 Likes

These vails have different strains of cannabis, 91% IPA a little NaOH, and some also have carbon…but the carbon doesn’t seem to matter. Anyway, hitting them with UV light made them fluoresce in totally different colors. The camera doesn’t pick it up the same as the human eye, but close enough.

6 Likes

Anyone put THC-O-Acetate under UV before?

Wow! I can’t wait to try this.

3 Likes

I’ve seen this in both ethanol and CO2 crude put into SPD in multiple labs. Hope it works for you!

2 Likes

not sure if its connected, but this is about the frequency you want to hit your plants with in flower to increase thc levels

I’ll tell ya one thing, Philips 930 T9 bulb emits lots of uv. Did 2hrs flower work under the lights. Shoulders, back and head tingles, and in replace my floor every other run from uv dry rot. The plastic gets super brittle.

The t12 has a double glass jacket, this traps most of the uv compared to the t9 style.

3 Likes

the ceramic metal halide one? I’ve heard the new mh have high uv but I haven’t found one with the spectrum posted that rivaled hps. I’ve been toying with getting the reptile uv lights. specifically a t5 54w 46" 10%uvb/30%uva german made bulb from zoo med/reptisun

https://www.amazon.com/Zoo-Med-ReptiSun-Fluorescent-Chlorhexidine/dp/B07DYSPD7L/ref=mp_s_a_1_1?keywords=zoo+med+54w&qid=1570978942&sr=8-1

1 Like

Yes, I only run Philips cmh bulbs. I grew up in fla on the gulf of Mexico. I clearly remember getting tingly from the suns uv Ray’s. Almost the same effect I get when I’m in my veg or flower rooms under the hoods. Ppe is strongly recommended.

1 Like

are you breeding? your herb must be potent af. successive generations will evolve towards higher thc in that environment.

2 Likes

My darlins net tested at 23.x% thc

2 Likes

I can do this.

2 Likes

Amazing.

This is olive oil with UV
IMG_1544

And olive oil infused with decarbed cannabis flower
IMG_1545

I noticed some weird droplets at the bottom of the infused olive oil.

under UV
IMG_1535

6 Likes

Hmm have a needeled syringe ?
Tip the bottleneck 45 degrees an see if they accumulate then suck it up
See wat it is water??

2 Likes

I added more olive oil, warmed and stirred on a hot plate. Droplets are now gone.

I may try to do a bigger batch and use the needle Trick to try to grab a sample.

2 Likes