I guess if there are still some guys need help? I’d like to connect! These metal central tube are metal, ceramic mouth piece. Some capacity .5g 1g 2g.
We are gonna quietly enter our new All-in-one into this topic of best disposable vape pen.
URTH 2.0
- Enhanced Flavor Retention Ceramic Formula
- Easy Press Capping for Mass Capping Capabilities
- Refillable (although not recommended)
- .3ML/.5ML/1.0ML capacity
- Easier Filling compared to earlier version
- Eco-Friendly Hemp Plastic
- Upright design for less clogging
- Built on established 510-thread design
- micro-USB Charge Port
Available in March 2022
We’ve been making the most reliable and consistent Vapor devices for cannabis since 2018.
Made for cannabis by cannabis professionals.
8 Likes
Visually the design is dope. 
0.3’s. perfect for samples.
May I ask the specs? Voltage resistance etc?
Rechargable?
Pulse tech or no?
2 Likes
I think should be avaialable in March 2023, right?
3.5 V @ 1.7 resistance seems pretty hot to me. I think those all in one high temp ones hurt your brand.
You may get a few organic clients but I doubt your getting return buyers of that product…I’m assuming you have a bunch of inventory…
Best advice gut them…throw the innards away and put lower temp setting hardware in em.
Hot temps make the best oil in the world taste like burnt azz hole hair.
@FicklePickle am I right bud? Lol
3 Likes
These are the technical specs for the original URTH 1.0 disposable that incorporates an old generation ceramic coil that has been used since 2018.
The URTH 2.0 incorporates a ceramic formulation within our coil that is formulated to prevent burning even at elevated temperatures. This is our first release into the market.
We have spent the past year developing this formulation that somewhat incorporates temp control in the ceramic formula instead of trying to “pair” a battery with the right resistance with the right oil formulation. A common challenge for the typical consumer.
When compared to the average generic coils being sourced by dozens of random ceramic factories, we deliver a “user experience” that is far more preferable when properly tested by connoisseur cannabis enthusiasts with refined palettes. Early taste tests confirm that our new ceramic on a 3.6v tastes great - even compared to our old generation coil that has won dozens of industry awards already, yet does also burn at 3.6v on extended draws of more than 4-5 seconds.
Therefore, the technical specs for our hardware doesn’t always compare to “generic” vape hardware that is roughly 90% of the industry.
Im not speaking from reading… I get access to your products pretty early b/c a friend I know has me test them out.
I just remember the stick was too hot…
All the other batteries y’all put out are good. Low V.
The alpha is that smart pulse the high setting
is 3.2-3.5v
Be nice if y’all made a high quality low temp smart pulse for all in one set up.
Maybe do disposables and re useable line. Might make the carts obsolete…but all in ones what folks want.
Easy for consumers…simple convenient. Ones that don’t leak or clog up after use. Why not make em just like the twist , stick and that other alpha stick?
1 Like
Got it. We are apparently having two different conversations, as we had recently posted about the new URTH 2.0 Disposable. 
The URTH v1.0 was our first disposable where we attempted to utilize a very generic ‘mic sensor’ that costs less than a programmable chipset that is not only more expensive but incredibly wasteful in a disposable that gets tossed after a single use.
This ‘mic sensor’ was only available in a 3.6v setting at the time. Although, there are lower voltage ‘mic sensors’ available today - although limited and unpredictable in supply, which further complicates manufacturing.
It isn’t that we can’t or don’t know how to make a great disposable for various oil types, it’s more about how to balance cost and sustainability. By adding a PCBA and adding our “pulse” technology, we’d be simply increasing the cost (which nobody wants) and defeating the purpose of a “disposable” device. It’s like being asked to make plastic eating utensils and then being compared to fine silver cutlery.
When designing and manufacturing a disposable, we have to consider variables such as cost and availability of materials in conjunction with trying to make responsible products that don’t pollute our landfills (considering we are talking about a one-time use disposable.)
I think you might find our next generation URTH 2.0 to be a bit closer to what we wanted to deliver. A great design, affordable construction, an optimized heating core for flavor (without the need for pulse tech) and the use of sustainable materials that natural decompose within two years.
Less Plastic. More Weed.
3 Likes
I understand…
I just think those high temp ones hurt your brand. Better off throwing em all away and take the loss vs working hard just to hurt your name to save a few bucks.
I did hear y’all changed the heating element a while ago.
I couldn’t find the specs…and when I asked you didn’t answer. I figured b/c I could just click the link…which I did…and saw those high voltage numbers.
Do you mind sharing the specs for the 2.0?
I’ll grab a few from my buddy to test.
1 Like
kindly check this Folar Omin which is our best seller for small capacity product.
oil hole can be customized based on your oil and also the resistance.
we are professional to match the best device to your oil.
contact for more details mandy@folartech.com or whatsapp 86 136 9193 5217
AVEO Spec Sheet - UTD2.pdf (442.7 KB)
1 Like
I was impressed by the quality and flavor profile of the URTH, but we are looking for larger capacity. Currently looking at a 3.0mL disposable. I think eventually the market will start wanting larger capacity vapes as evidenced by the ecig market cramming more and more juice in for the same price. Especially as input prices fall.
5 Likes
Either larger capacity tanks or “like e-cig” you have refillable tanks so a consumer isn’t stuck purchasing a 3ML vape pen and then have it die or malfunction and you’re out 3ML of oil or try to break it open to salvage the oil.
It’s why the URTH 2.0 has a patent-pending unlock-able mouthpiece so you could “potentially” refill and use again.
Then as a brand, you simply supply refill syringes to the customer instead of having to offer different capacity pens for different types of customers.
2 Likes
A quick question for you. Do you ever experience the plastic cracking when pressing the mouthpieces down when using an arbor press or soft mallet to cap?
We’ve heard and experienced this ourselves from time to time. The new URTH 2.0, employs our “Easy Press” capping system so it requires less force and eliminates this problem with our previous version as well.
1 Like
Hi Brother,
We have the 3ml disposable, here is the photos for your reference:
Hope you will like it and feel free to contact us.
1 Like
These aren’t available yet. Fyi.
1 Like
Issues experienced w the press ins are they pop back out. (Carts, idk about the all in ones in volume)
But yes they also break. I’ve heard there were a bunch of complaints on those.
Pretty sure y’all have already fixed those problems though. (that star pinch design in the tops 
…whoever designed that deserves a gift)
1 Like
When will you have these available for samples? I’d like to check them out when you have them.
3 Likes
We will start producing at the end of this month.
4 Likes