Rosin pucks and all material goes to Ethanol for distillate imo.
I wouldn’t blast it.
4 Likes
We turn the pucks to BHO. I’m wondering about the washed material.
1 Like
I’d like to see the end results.
Right, I’m talking yield size difference of same strain using rosin vs solvent technique, not different strains
1 Like
Not all squeeze
1 Like
Pucks to BHO?
1 Like
Yeah, I’d like to see the bho!
1 Like
You’ll always get more while washing or blasting vs squishing.
4 Likes
Youll always yeild less doing rosin compared to bho or etoh.
Rosin yeilds is what got alot of people screwed up when it was blowing up.
Alot of people saw $ bought a press and started squishing their entire grow. Only to get dark low yeilding oil. I remember that too well. It was all indoor. Sucks he didnt recover from that
3 Likes
You could extract it wet, I got hydrocarbon teks for sale fam
1 Like
That’s what I’m curious. What that wet would yield, I don’t even know if it would be worth doing.
To dry could wring dry then freeze dry, basically into a keif like powder.
If you want to dry it invest in a panda spin dryer, a heater, fan and a dehumidifier
1 Like
Here’s my “ethnic pot tek”
2 Likes
Any reason you recommend that over the freeze drier?
I’m sure a freeze dryer could replace the heater, fan and dehum but the panda or any basket centrifuge is a must!
So my papaya punch yields 5.6% bho. Just got a rosin batch done and it came to 2.137% rosin.
3 Likes
Ouch.
I wouldnt even run material yeilding 5%
It would take 20 lbs to equal 1 5 lb run from what im used to.
4 times the work is never fun
5 Likes
Are you an organic dirt grower? The reason I ask is a buddy of my is an organic dirty fingers and with him standing their and using my press technique his Stardawg pressed out to just above 5% and my Stardawg grown in hydro using Jacks pressed out to 18%. So your grow style also affects your yield.
1 Like
Hydro. Udwc
1 Like
Damn the bad luck well may I suggest another strain or a different papaya
1 Like