Hello,
Looking for a more efficient technique to add my live resin onto my Kief before pressing it to bars.
Mixture would be aiming at 30/70%.
Speed mixer or flack machine might be a bit pricey for my setup. And a spray gun i fear might move the Kief away with the pressure.
So far ive been rubbing it in my hands and trying with my blender. Any tips on how to proceed with a more homogene result?
What are you marketing said product as? Bubble hash?
Trying to make product similar to the regular marrocoean commercial hash plates.
I have plate pressure and foil, will follow with a tour in vacumm seal and boil for few minutes.
Meat grinder?
Can you first explain how you prepare your kief. What shape is it in, at the microscopic level.
And what stage is your “live resin in”…assuming you have have made a BHO or propane extract at a specified temp, perhaps followed by one spool of CRC and. Allow to evaporate is a specific concentration with out THCA precipitation? Then define what you mean by “adding this resin onto the kief”….assume you mean coat, (if you have not already damaged the kief structure ) or do you mean “mix” as in a homogenous mixture where structure is destroyed, as I note you say you want to “press” to some degree this undefined mixture? You understand that the residual alkane in the live resin mixture is going to extract the kief? What makes you think this is the “regular Moroccan “ method of production. I thought they just mix rather well dried (4-6 months) sifted trichomes with a bit of Coca Cola and pressed. @ RogueLabs could certainly straighten you out about this subject.
I am not sure but I was under the assumption that hash made from fresh frozen high quality outdoor marijuana “Sells itself”. Why do you have ideas of adding high THCA resin enhances this product? (When vaped?)
just clean up your keif better and press it into blocks. no need to try to fool people, unless you are going to say it is 70/30 blend on the packaging
I really appreciate your respons and i must admit i recon my lack of proper explaining my situation. Sorry for weak terminology.
My kief is 120u high quality sticky cbg Kief (~22%). Regarding what stage my live resin is i’m not able to explain, ive acquired it without making it my self as well. However i would assume it’s final stage and no thca precipitation had occurred.
I definitely ment mixing and not coating. I want to archive a completely homogenous mixture and yes where the structure is destroyed.
I know this is far from the morrocan traditional way of producing normal dry sift, i was simply referring to the structure and appearance of final product.
I guess im sticking with hand mixing or my blender (and bear over with the transfer loss) for now.
Oh’ im gonna sell it for what it is.
Luckily 80% of my base prefer exotic flowers anyday, as do I. However i do have a small group with huge demand for sub-par budget hashish.
And even through i carry high quality premium imports, they seem to prefer the real lc bottom stuff. Although much better product is available for them at only a fraction higher cost, i cant seem to keep the bad shit in stock. They crave it and have no disregard for impurities. This is merely me trying to create a more healthy alternative in the same budget range. I have no intentions of fooling anybody, merely to accommodate the requests. Simple expanding with alternatives, which i would assume more healthy tbh.
Aaand, i have alot of resin left with low demand, so for ridding that as well. Kind of exploring the opportunity as i have lots of leftover kief too.
a spin tek would be the best bet and they are much cheaper than a flaktek
Don’t.
Unless of course you’re explicitly telling the end user they’re buying hemp cbg and mids af live resin.
-EDIT- Just read you’re disclosing the blend. Good on ya.
Where has all the Tegridy’ Gone?!
i said the same thing haha
WOW….My only question , is how do you know the resin is not THC? So your Kief is 22% CBG, not CBGA?
What ever, if I understand you, it has fabulous flavor and you want to mix it with a “marijuana resin” to add a boost in the “get high” quality and keep a the price low for specific customers….? My only thought is buy some hemp sourced THCA which is dirt cheap. Mix your CBG kief and resin together , by hand at room temp, add powdered THCA until you have the desired consistency. Then press in molds or what ever for sellable shapes.
Your marketing approach is unique…and notable.
Are you out in the islands? Making do, with what you got? Creative.
Im curious what your “live resin in it’s final stage with no thca precipitation” looks like. Depending on the consistency, you can freeze it on dry ice, pulverize it, then mix it with the kief. Can you post a picture of it?
I dunno about mixing ,but kief vs hash is pressing the keif which pops the resin head/gland. I used a 10 ton press and put a lil heat on it?
Don’t overcomplicate
Meat grinder. Just run it. Fold it. Bag it. Slab it. Don’t get too fancy.
Ok caveats
HTE is composed of more than yust thc-a and terps and one can almost asume that all other compounds will work as a solvent terpenes included
So. This will dissolve a lot from the biomass making the end result dark
At the same time the accitic cannabinoids present will need time to crystelize once sufficient hte has been dispersed
Pretty sure your consistency is a whole lot different after 2 weeks
If we look at naturally high terpene content hasj we learn that cooling and keeping this hasj cold
Prevents the terps working as solvent
Piatella and even dry sift or 3 pl filters should be stored cold
So what I would do is work with already extracted pollen at least a portion
I would work with at least a portion of cbg pollen since they absorb more
I would use a spray tech on the pollen to get the hte dispersed as much as possible from the start at a temperature no higher than 25C
What’s not clear is the consistency you are aiming for nor the concentration of thc/thc-a
All in all I doubt you will make something pretty with this folrmulation
