How much washes off?
Or in fewer stepsā¦
Dab. Done.
Ooo
U R exactly right!!!
I thought he asked how to get rid of the terps he didnāt like
That is exactly what @Lemonade_dave was asking.
If you add an estimate on how much you lost, then he can compare a rinse to the spin.
Scale & desired end point make all the difference. Small centrifuges are dirt cheap.
Did you get those at the store?
Flattered . Honestly I donāt think you KNOW the joy these comments bring me!!! Compared to the best? Wow!!
Iām only Roughly 1200-1500miles from any āstoreāā¦
Lucky fucks!!!
Yāall just keep changing the way for the rest of us and Iāll keep following!
Love u guys!
Also not store bought
I find unspun more fun.
Unless we are discussing the cyclecide human centrifuge, in which case spun can also be quite amusing
Edit: apologies for the debris, itās personal meds in a used jar that has now been in and out of my pocket for a week.
Put all your biomass in that spaceship ride at the fair lmao
Iām also using 6x48 inch and 4x48 inch tubes. Iāve been doing 3.5 lbs solvent to 1 lb. plant matter, I would do 4/1 but Iām being conservative right now, trying to dial in my recovery rate. I discovered one of my TRS-21 pumps was performing at less than 50% recovery rate through process of elimination. So Iām currently just using one TRS-21 for recovery; takes longer but recovery rate is over over 80%.
Hey Lemonade_dave !
I run a closed loop system and have .5lb, 1lb and 2lb material columns, at max compacity for every 2lbs of material you want to use 5 lbs of solvent, for every 1lb of material use 2.5 lbs of solvent for .5lb material 1.25lb solvent, I have ran this equation on each material column and have produced beautiful product with decent yield. Hope I could help xx
7 pounds of isobutane to 1000 grams of material. Straight through, no soaks at all. Averaging 19% return on about 500 runs that have been tested this way. Potency tests are averaging 86% total cannabinoids and 75% total potential thc. This is all dry trim and dry flower runs.
wow i run substantially more tane than everyone else does. i push 10 / 15 to 1. no soak straight through in shorty columns.
if you do a second push on a sleeve i found if you refreeze at -100f immediately your tane wont over soke your material. it will come out a touch darker but you can get another 20 to 30 gram of quality product on 2lbs of material
Iām running 4 lb gas to 1 lb material with stellar results I was doing 3 to 1 but seeing highe feild with 4 to 1
on a large enough scale that would create artificial gravity for your spacecraft
Can you explain to me how.high my temp must be when i have the glob in the vac Chamber ? I just cant get the cookie texture i want ! I read and see on youtube but they all dont wipp it ? So do i have to whip it after blasting and scraping it on parchment ? Or do i wipp it during run in vac but on what heat Celsius ? I know not above 130 but i have tried all sorts of temps but it just wont turn from shatter ro honeycomb ā¦ I see your diamonds and sauce man soooooooo Dream ful i will sleep this night ! Greetz from across the ocean in cold rainy Holland
130 is farenheit. You realize that ?
good point.
once decarbed at 130C, it presumably wonāt harden up no matter what how much itās whipped.
Changing from shatter to Honey comb
If iT shatters iT should be Ok
But i think he is Pulling to hard a vac on things and to long