N-135 (10% NH4)
P-57
K-170
Ca-155
Mg-170
S-127
Si-18
Micros
Fe- 3.14
B-1.02
Mn-0.89
Zn-0.17
Cu-0.15
Mo-0.19
Here is my Hybrids Veg profile:
935 ppm full
I start now Bubblegum x Diesel x Northern Light with 750 ppm in coco.
Got a healthy second leafs. Nice thread! Thanks again for all good info here from emdub27 and other cool growers!
Next run will try rice hulls
All your micros is good but why so high Cu and Mo? Cu may cut some THC, Mo is toxic above 0.01 IMHO…Maybe only for Veg is usable.
All good man! Try my numbers for Ethiopian landrace. I am worked that hard! Still no info about this cool strain. Thats why I put my digits here ))
Sorry, I have to re look at that. I think it’s actually 0.009. The Cu I was going off of some suggestions by Harley Smith.
By the way, Merry Christmas everyone
And you !!
DAP (greetings to mr. Harley ) is for preflowering + roots.
Yes sir i use dihydrate calcium. Can use osmos or TAP 55Ca :15Mg
I had seeds from Jamaica i brought home, tried growing them indoors but she would grow to fast and vigorously. Extremely leggy, this was in 2015/2016 so hps was still the norm and goto. Ended up putting them outside and they finished at a little over 10 feet tall and were cut in a michigan september. I didnt want to go out to October.
I cant say definitively if it was a landrace of any sort but it was for sure a sativa. From what I remember I used dyna gro foliage pro start to finish which is a 1 part along with dyna gro silica and some molasses type product from growmore. One of the coolest strains I have grown. Bunch of purple and pink colors. I dont think the sativas require anything special and I would think your ok.
Seymour
Took Canna Coco micro. AN and Canna micros do not have so much Cu. They also contain fulvic for better absorb some micros…
Are they prediluted bottled mixes I assume? I usually add Mr fulvic right before I hand water. Been adding some GH floraliscious plus for B vitamins and enzymes, and Chitin to see if that does anything.
I mix my own AB. It was created 1 year ago. I am back to this program.
3 different formulas in one AB!!! I call that product - SOLUTION ONE.
SOIL. COCO. HYDRO.
- A (4 ml) + B (2 ml) - 102-25-103-84-26-17-1.4
- A (4 ml) + B (4 ml) - 102-51-136-84-39-34-1.7
- A (4 ml) + B (8 ml) - 102-103-200-84-65-69-2.3
number 3 - first two weeks or clones or just maxibloom all cycle
number 2 - also not bad working for hybrids
number 1 - landraces
PS: all Boron is on the 1st bottle micro premix also in 1st bottle, but Fe, Mn, Zn addition in 2nd. And SOP 10% for life )))
Hi guys! Maybe someone can solve my problem that I have every grow Last 2 years. When I use bottled branded nutes, problem was gone, but when I mix my own with salts the problem happens again.
RO water
Cal Nitrate dehydrate NO3 17%, CaO 32%, NH4 0.3%
MKP Nova Peak 0-52-34
Potassium Nitrate Haifa Multi GG NO3 13.5%, K2O 46.2%
SOP Solupotasse K2O 51.5%, SO3 47%, Cl 0,6%
Magnesium Sulphate x 7H2O from drugstore
Micro Mix + Potassium Metaborate
Potassium Silicate
PH 5.9, 2.0 EC - Runoff 5.9, 2.1 EC. Everyday hand watering on the morning.
35%, 26C, 480 w Kinbrite dimmed to 175 w.
Looks like a classic K deficiency to me but, your numbers look good. I don’t see anything that could cause antagonism really. Perhaps your Ca may be a little too high causing a little bit of the K antagonism. I’m running mine at 155 elemental ppm. Perhaps some of our more experienced salt growers could chime in?
Yea man. I am also see this as a classic K block. You damn right about Ca. Seems that strain drinking more that eat. Thats why I go to nearest as possible to Athena numbers. Just before your answer I made this:
A lil bit more P cause I am also see a P block.
I think you have more than enough P at 60ppm. I would get that K up around 300ppm and more Ca than nitrogen.
Whats your environment?
It would be useful if you provided the exact weights of each chemical you are using. Since your targets look normal it might be that your calculations are incorrect and therefore your additions are not matching what you think they are.