naw… @SkyHighLer lived in CA. if i remember correctly. @Demontrich im almost positive is in the D.
5 Likes
Thank you so much for posting this list of parts. I am a total beginner with SPD and am putting together the KF 25 bellows connections from my vac pump to 3/8" adapter. The two pieces I have not been able to identify and locate for purchase are the KF 25 Pump Inlet adapter (connection from vac pump to valve) and then the adapter to connect the Bullseye vac gauge to the KF 25 Tee. Any help pointing me in the right direction would be greatly appreciated.
I have the bullseye to kf25 on my Website as well as other vacuum parts.
2 Likes
Nice. Great pricing too!!
1 Like
I really only try to carry stuff i have a pricing advantage on. its the reason you dont see KF25 clamps and gaskets. I obviously can get them. The problem is my supplier is more expensive then i can source them in the US.
I’m guessing this is what you connect to the Bullseye?
2 Likes
Yes, that is what you use. 1/8"mnpt is what the bullseye has.
2 Likes
Thanks again. Still need to adapter to connect the valve to the vac pump. Doesn’t look like you have that?
no…that is all i have. Are you trying to hook up a welch 1400 or similar?
Hi , was running our Colorado Extractions Falling Film today and had the magnetic spinner stop on me and get stuck in the gold. . ended up making big rock like crumble rocks and half the honey pot was almost hard, mixed with mud like. Norm like soup with the 5% Ethanol left, this wasnt., Now on the SPD, decarbed for 2 hours at 90, and no bubbles, then when transferred to SP and hit the vac, its like a volcano. . . … have to depresurize asap or risk getting head all filled up. . . let it cool and did it again, happend again. . not sure whats up. . .ideas? what hapened in the honey pot!!! #frustrated and #overtired. .
Decarbing in 2 hours or less needs higher temps 120/140 C
sorry, Purging. before SP to get the ethanol out, but your right, might not have been long enough. Ive run this several times and not had this problem, thanks for the pointer. @Roguelab
1 Like
What stir bar would you recommend using in the 500ml rbf?
1 Like
Also stir bar big or small cross or pill form?
If you remove the screw the whole black think comes off and then your ballast is closed and just pop it back on when your shutting down
Regarding gasses for exclusion of Oxygen, Argon, 99.999% is available for $30 or $35 USD in Disposable 17 Liter Cans, with CGA600 threads, so there may not be any need to spend more to buy a regulator if there is an old MAP Gas or Propane torch available. I don’t recall forum rules about identification of suppliers, so I’ll just refer to two of many suppliers as G Rainger and thE Bay. Just search for “Calibration Gas Argon”. These come in sizes up to 117 Liters. And regulators for “calibration gas” cylinders are easy to find on thE Bay, and the less expensive ones are ~$20USD…
4 Likes
I use Argon gas as matter of habit in the lab! I know a lot of folks here are on a budget, so I will just say that for $30 to $50, Argon can be a game changer in terms of eliminating discoloration by oxygenation… Very much so if one were every going to close a ring with a Lewis acid, for instance, it keeps everything colorless to light yellow depending on the color of the isolate one might begin with, assuming that one would also keep the temperature around -40… You know, because it is heavier than air, it makes a pad of gas that cannot react with anything found in a lab until conditions exceed what any lab for our purposes is capable of…
5 Likes
ht
Hi everyone, I’m new here. I have such an amateur 5L SPD set , but I can’t post picure or link i dont know why . I need a distillate because I have 2 sick relatives and I want to help them. I live in a country where the law is very bad when it comes to hemp. Please, I need your help because I’m a little desperate. I admire the knowledge and skills of some people here. I read a lot about SPD but I still haven’t done it yet.
Where should I start ? I have crushed grass and 96% ethanol. I know you have to pour half a 5L dish, but first freeze it and pour through a coffee filter, right? What can anyone tell me next? I will give relationships and with your help it will succeed … … Sorry for my English 
Regards to all folks on the forum
You posted an identical question 4days ago.
If you have the same question, re-read the answers you got over here.
If you did not understand the answers you received, or if you have NEW questions on the same subject, that would also be the correct place for them.
You’ve been given solid advice by a number of folks. Repeating this question verbatim suggests you didn’t understand that advice and/or have zero respect for those that gave it.
You don’t need distillate for your relatives, and you don’t make distillate by filling your spd flask with raw tincture.
4 Likes