Don’t get a CO2 system.
A hydrocarbon set up can make anything that CO2 set up will make.
The CO2 set up cannot make the same products the hydrocarbon one can.
And you can get a 5lb hydrocarbon set up for less than $15k.
Don’t get a CO2 system.
A hydrocarbon set up can make anything that CO2 set up will make.
The CO2 set up cannot make the same products the hydrocarbon one can.
And you can get a 5lb hydrocarbon set up for less than $15k.
Is a good price on a decent tool. At least while learning at 5-10lb.
There are even after-market mods for them you can read up on here and here
Thanks 2 everyone for chiming in really appreciate the hell out of it and sorry for delayed response where I’m new acct it maxed out my replies n I’ve BN n mountains last couple days for a reset n man it was nice I’m most definitely going with a hydrocarbon after reading more . I’ve BN looking where I’m at but no legal states near VA or large market .So what is something you guys wish someone would have told u that u had to learn the hardway??
What is cmep??
Its a piece of piston driven lpg recovery equipment. CMEP-OL
one of the first recovery pumps actually rated for the task
Check Recovery pump selection
I mainly use them for pressure testing equipment…but they are decent recovery pumps at smaller scale.
Got ya
As an end product…what do you want to make and SELL?
Work backwards from what can I sell today?
Edibles shatter and carts and would like to try diamonds eventually// I don’t have access to large amounts of dry ice so has to have a chiller .I thought bout etoh but way to expensive upfront n would need a shit ton of expensive equipment
Is “trim” worth $100/kg?
Just curious
In Michigan… licensed market. I’m getting between $150-200 per lb for my trim. That’s what… 300-400 per kilo?
Then you haven’t looked at the problem correctly.
See Eg: Bucket Tek (Cold Ethanol Extraction on a Budget)
learn how a panda (suggested above by @Roguelab ) is relevant.
You already have solvent recovery & purging in hand, so my math says you could be making panda assisted qwet with an outlay of about $500
if you’re aiming a shatter, I’ve got a redirect for you: How to turn "Shatter" into diamonds/sauce/distillate/anything I can sell?
Wow never knew they made small one last stuff I used was a cup15 and a cup 30 from delta then ffe and a rfd which was like 2or 300 k not counting install
Link for those pandas?
Thanks. Guess i have more reading to do now.
Enjoy those prices while they last. CO is down to $75-90 lb for indoor and $2.50-3.50g for 86-90+ distillate.
Once the hemp-derived bullshit comes to an end, the prices are going to rockkkeeet.
Those are clothes dryers.
Washing Machine "Salad Spinner" tek
But so were BOCK when they patented their centrifugal extractor….back in 1905 or so I believe.
See: Got BOCK? perhaps
Nah, our market is most likely considered more of a matured market now instead of an emerging market since its been around recreationally 10 years. Its normal for prices to go down and hopefully they will stabilize soon.