You can yank the lead back out with needle nose pliers to have it make contact again
3 Likes
These carts look great. @Ascent very interested.
After about 700 hundred of these my reports are as follows:
Do not overfill even by a small amount, i use an allflex syringe and if I have even a small bubble of air it’s enough to throw the dose off enough to overfill slightly on occasion. This causes the gasket to blow out when pressing the tip on and if it snaps in place youre fucked the cart is no good and you lost 20 bucks worth of oil. Only had that happen once before I started double checking fill levels.
Also make sure the gasket is perfectly seated before pressing mouthpieces on. Had another one slip loose during pressing and it was impossible to fix after the mouthpiece locked on.
I’ve had maybe 3 or so with out of round center posts the mouthpiece too far more effort than any other to get on. They stuff functioned and worked ok but it was just something I noticed. Haven’t tried any .5 yet though.
9 Likes
Excellent posts everyone! My samples are arriving today!
Great info, thank you!
I had another 1ml failure, which was my fault, and leads me to believe my other 1ml failure was also user error on my part.
The yocan uni I have been using for a short time is garbage. the button doesn’t “press” reliably. so you’ve thought you’ve turned it off, but in fact you have not. So I pocketed the uni, thinking it was off, when it most certainly was not, and I cooked the 1ml in my pocket.
I need a better power source for these carts. Qma, killa12345, how are the imini and storm working for you?
1 Like
Has anyone tried the Ascent batteries? Its seems from my experience that button-less slim batteries from C-Cell dont work that great with these carts. I have to screw these carts all the way down tight against the battery to contact the connection, but tightening it down restricts the airflow very bad. I have tried it on some other batteries that have buttons on them, from different manufacturers, and all the batteries with push buttons worked great. Im thinking of putting in order for thier batteries but wanna hear it from you guys first
2 Likes
Im.still rocking the evolve batteries. Still on one from almost 2 yrs ago.
Dhgate
No adjustable temp
No preheat
1 Like
It’s simple one. Both of battery cell and IC are the key points
If any one order carts from us and remind me to drop one battery in the order. Free Free Free!
Who goes first? Not too much in stock
7 Likes
Do these come with a charger too?
1 Like
I have 2 prior orders, not sure when my next order will be unless ppl need me to break them.off a box if they need asap
No. We can replace the packaging to blister clamshell or black gift box, usb charger or miro usb charger including. All depends you. I think 15 samples left can ship out.
1 Like
Killa swears by the battery that you dont like lol. I use the iMini because it gives partial protection while being cheap and small. Very short battery life, keep it charged.
Acent also offers their own personal battery, called the “erato”
1 Like
Erator has bigger power, but price exceed to much as client expection. We sells few, but defiinitely good item.
2 Likes
C-Cell Palm and Silo have both lasted me over a year and work great with my .5 ceramics.
I’ll drop 1 or 2 in your order if you could remind me next week before Tuesday?
2 Likes
Oh I forgot that these batteries have a micro USB port on the bottom. No charger will be needed. Ill put in a order of 100 of them with my 1000 cartridges order and see how they go. Should be putting in the order today or tomorrow. I tried to place a order yesterday, but my bank is not authorizing the payment. Gotta call the bank.
2 Likes
@PeterPaul
'll take 2 if you wanna break them off your order.
1 Like
Ok. Commander
I’d like one dropped in my order!