Pics or it didn’t happen
I’ve been asking you for any kind of test results and you can’t provide ANY
Your not gonna hit this kind of vacuum on a glass chinese wiper
Keep lying and trying 
Or just stick to SPD where you belong
I came in here to talk shop and you started talking shit like a keyboard warrior
Keep trying though bro you’ll learn soon enough
I love how you always have an excuse for why you have no test results or pics, always something with you
Bro I run my WFE inside the Large Hadron Collider at 0.00000000075 micron.
Get on my level. 
id believe you over breaking dabs lol
I have made 1st pass on wiped film that hit 99% cannabinoids plenty of times. Parameter 160/90. I would have been interested in seeing results with a hotter condenser but i never had the right heater array. It couldn’t have improved potency since it was already perfect. Maybe color, but the color here doesn’t look any different from typical results. Wiped film should always come out light without any special techniques unless you’re running multi-year old oxidized material as your feed.
I think with the hot condenser one of the biggest gains is speed. I see 3x the output easily.
Not too surprising. If you can raise jacket temp to 210 without hurting color, that would definitely be a big boost in speed. I’ll give it a whirl when i have the chance.
@AlexSiegel Not the prettiest. But off the chain potency. Hot condenser… thanks fir the knowledge @anon42519203
190 jacket
140 condenser
Does a hot condenser improve speed that much? My intuition tells me that a hotter condenser would reduce the condensing ability of the condenser. Maybe the hotter temperature makes the distillate less viscous and makes it easier to run down the internal condensing body?
In my experience, it’s at least a factor of 3 in speed
it does help with lowering viscosity of the condensed disty so it has less chance of overloading the condenser, but this is just one emergent advantage of running the condenser hotter.
Adding my client @nhextracts to the convo. Jar on the left is 165/123 on stainless. Right is like 155/110 . Notice the more we increase it’s getting a shade lighter.
How much for a liter please?
Logged on to just say… anyone wanting to see 0.75mtorr at the pump on a 200mm glass wiper… its on my page… first mains strip from tails… all the terps are out before this pass… suck it trebek
Densone! Thanks for all your help man! Just got the COAs back on these bad boys. 90% Cannabinoids with great fractions across the board. 77.65% CBD w/ nearly 9% CBC!
That’s great. Still some room to improve a little but super happy to see it all coming together.
My hemp client in the Midwest not @nhextracts above, also achieved 91% cannabinoids. 2 passes, hot condenser style.
What are your condensor temps at the 159C sample? I wanna try 158C jacket and 95C condensor until I can get dynalene 600 to run hotter finger temps. Thanks!
Am going to try 158C jacket temperatures very slow feed and 95C condensor to see if I can get the same results your talking about here. Unfortunately do not have a silicone fluid for my chiller yet but after will try 190C jacket and 155C or so on condensor and play around and let yall know the results. Any tips or you think 158C jacket and 95C condensor since I only have water in my chiller is probably my best bet?
My tip would be to make sure your crude is as clean as clean can be before starting. No fats, no waxes, no sugars, fully head stripped (including high temp heads) and tar fraction removed before aiming for your mains removal
One year later and I still wanna dump that all over my head.
