yep. they are quite popular with the cannabis/hemp crowd
mainly due to this website
…and the lead time for new ones is now about 20 weeks.
price has also gone up $20k since I first talked to NSEP
1 Like
you’re not going to find a good solution in your budget.
set aside ~50k for the spinner, your new electrical hookup, and all your new plumbing needs.
2 Likes
Is there any other method of extraction you might suggest if processing via centrifuge is not realistic with a budget under 50k? I need to run 5lbs at most at this stage. All of my extracts are being processed into coconut oil and then into salves/ tinctures. Do you think a screw press with ethanol/coconut oil could be viable and then decarbing before manufacturing products if a centrifuge is not realistic at this price range?
1 Like
capna has a non jacketed one for around 20k
2 Likes
Yes at your stage, I would probably just use a press. All of these centrifuges are really oversized if you’re just trying to do 5 lb a day.
I’ve been scrounging for a similar solution. Looks like China has some fuges rated for etoh, but I’m not sure if they’ll pass UL certification standards, nor do I know how expensive it is to modify them to meet those standards. Explosion-proof motors and PTFE seals look like they should be fine, but as you know, regulators like to make shit unnecessarily expensive.
Correct me if i’m wrong but I believe both the HZB and Ace centrifuges are chinese imports with the motors replaced and some other mods.
2 Likes
And certified 
2 Likes
I think you’re paying for the certifications and I’m sure some r &d goes into the control system
1 Like
The UL motor and controller made in a UL shop aren’t all that difficult to source and install… but there are definitely challenges in the stateside retrofit/upgrade.
The mods Hzb and Ace asked for are now widely available…so I haven’t asked for all of them.
I think your biggest physical problem is going to be the drive shaft seal. we had to design and manufacture one.
if you need 3rd party sign-off, there are a hoops to jump through, and exactly which hoops you hit sort of depends on which stranger (3rd party engineer) you ask “is this gonna work?!?”
my asking price also includes onsite installation & training, pre-install help with chillers, pumps holding tanks, evaporator and distillation equipment selection and a cyclopath at your door should the thing break within the first 12 months.
If you don’t need that stuff, I’m good with you not needing it. 
for those that do, I’m doing my best to provide it at a fair price
I don’t think it’s the biggest or best cat-skinner out there, but I have my eye on that too…It is a solid option at a competitive price.
I’m not sure any of my competitors machines refuse to spin if the lid is open. Still working on making it impossible to climb in while it’s spinning.
5 Likes
What’s the price for the Ace 30?
Here’s your budget C1D1 rated honey-oil extractor.
And a budget sealed distillate homogenizer too…so you don’t lose those terps 
16 Likes
legit old’ timey equipment. The minions would hate you after making them crank for a whole shift though xD
6 Likes
The unit I’m ordering next week is 8kg floodable, jacketed, and flat bottom. Motor is UL listed but the control box is NOT. 15 lbs or so is perfect for us little guys.
4 Likes
Thoughts on one of these guys?
what’s the specs on those bad boys? 
That’s more of a filtering non floodable fuge.
would I use just off the shelf honey for one of these?
can u send me an sop for exactly what honey ratio to mix
