Ok everybody, let’s hear you favorite powders for color improvement and still be a stable shatter product in the end. Right now I have been using best value vacs color bleach and it seems to be great for color and terpenes but not great at making a stable product. Thanks
1 Like
Yeah I got chewed out by the packagers for the pull n snap being straight sap… Its largely strain dependant in my experience. Problem is crc will offer a partial dewax if you don’t run one already and most products lack stability. @Waxplug1 has some chemtek products that may give you a better chance
W1 W1 W1 W1 dub-a-you one is the truth. I’m a distributor in the Bay Area if your local and ever want to try it out. You’ll never go back to anything else @newcopharmz
Ima need to see a claim to that
Anything from @gochemtek is solid or crx from @MediaBros
3 Likes
It’s funny because its exactly what I would expect to be the sales pitch for it as a CRC media
7 Likes
So you’re saying it pulls more impurities?
When a spectographic analysis is done on Aztec Secret Indian Healing Clay, almost every mineral found on Earth is present.
1 Like
That’s in the clay itself I’m talking while using it during crc.
I’m using b80 currently, I love the color remediation aspect, flavor has been great, but it seems to be kinda sticky and won’t “harden” or stable. I do a room temp extraction, 95 degree F recovery bath, then into my vac oven at 110. Any tips?
1 Like
Run colder solvent. If you’re running room temp you’re pulling all sorts of extra lipids and waxes which is probably what’s causing your instability more than the B80.
Think if I ran through an injection coil it would help? I’ll give it a shot
1 Like
Lol, do you just mix it in for that?
100%. Dry ice and alcohol slurry.
There’s other ways to skin that cat, but that will probably be your best bet.
That’s because b80 is natural. You need an acidic media to make more stable extracts. You see this while crystallizing as well. B80 runs take longer to crystallize. When you use an acidic media it crystallizes overnight. I would suggest B81 if you’re already satisfied with B80 results. B81 is oil dris first level of acidic media. Perform6000 is the most acidic media anywhere meaning it will be stabler but less terps. The levels of activation of the media go up starting from B81(low) supreme55(medium) perform6000(high)
3 Likes
Not trying to refute you, obviously you’re the media pro, but for data’s sake; I’ll say that all of my B80 runs crash 75-95% overnight at room temp. 1-2 days in the oven finishes the crash.
8 Likes
Even w1 if not dried properly,or not running cold enough or ur crc warming up or to much oil ran through the same powders can cause a dark extract
Seems 125gram i can get 4oz oil through it w just clear light golden extract… anything after its like no powders was used
I found a dash of AC on my b80 helped a lot.
2 Likes