1 sous vide 2 sous vide 3 sous vide 4.
3 sous vide 2 sous vide 1 sous vide no more.
Idk how you guys are getting these wheenie sous vide cookers to hold temp when using for a jacketed collection pot. Running 2 is no difference. Actually worse since the damn breaker keeps popping.
The collection pot is a large 12x48 jacketed.
Have a pump for each jacket. Water comes out so cold it can’t recover temps. Can’t get temps to go up at all
my first “sous vide” was a water heater element in black pipe with a standard water heater thermostat. 50ft of 3/4" heater hose let me put it at a safe distance. used an old keggle as the “hot pot”.
A bucket heater and controller is about $75 for something in the 1200-1500w range. I use one on a 12" jacketed base and it drops about 8-10 degrees, but recovers fairly quickly.
Thats what i use is a bucket heater they were 50$ on amazon when i got mine, but theey get hot i was only running crude so it didnt matter but if your not just doing crude get a controller like stated above.
Those bucket heaters are way weaker then sous vide I wouldnt use them. We had great success with three sous vides in a gatoraide cooler with the lid drilled out perfectly to hold three sous vides. If you just have a open bucket with no lid its tough to hold temps
Honestly, its way to small for my needs. I have a tankless gas water heater that will do 199,000 BTU or just about 42kwh but I’m having trouble trying to keep the system in a closed loop and getting the system to turn on and heat the water.