you have a bigger volume of nothing…so it will require more stuff (in this case water pulled from your aspirator) to fill that void.
yep…that is what you would expect. you’ve got a vacuum. and water to fill it with. you apparently find it abhorrent. tell has it that nature has similar feelings
break the line FIRST.
not weird AT ALL. is exactly the expected behavior. unless you have a check valve in there to prevent it.
Wow, well if I didn’t go Chinese on my chiller I might not even have to use this aspirator. I’m getting real tired of buying Pounds of ice… thought those days were over.
Cyclopath always appreciate the advice and how you break down stuff! Don’t know what I’d do without you OG processors. It is starting to work now appreciate it again!
that is normal, sometimes that happens to me too, the only way is that you do not turn off the vacuum pump and then open the valves, it recommends you first open the valves and that the vacuum decreases little by little until you no longer have much empty and then turn off the pump, what happens is that the water is replenished, it is normal.
I just loosen VAC through feed tube, then break line and then turn off aspirator. I put masking tape on my on.off button so I feel that and remember not to just turn it off.
My aspirator hooks str8 to my roto, no valves nothing. Im on a budget build.