Why when I melt my diamonds down do I get a light yellow translucent color and some diamonds melted look like ejac? I think the decarb may not be finished? Not sure tbh
2 Likes
I feel bad for you. I was about to roast you just now…but I don’t want to upset you or hurt you.
You spend so much time on here…doing a whole lot of not.
1 Like
Thats exactly why they look cloudy. Not fully decarbed.
IF cloudy usually they will re-nucleate within 2-3 days tops…def solidify.
You don’t have to decarb as long if paired with 100% CDT or HDT.
Also you can decarb under vac at much lower temps.
I don’t see anything wrong w that cart.
1 Like
for some reason this never seems to be understood by anyone. yes it will help boil off volatiles but it does nothing for the decarb rate. Nothing at all
3 Likes
not true. some understand it.
others begrudgingly accept it after it’s explained.
…but it certainly shouldn’t surprise anyone that the village idiot doesn’t.
10 Likes
Will this be the direct thread to review everybody’s diamonds on the market, or just of the diamond you reviewed?
1 Like
I guess I’m wrong. Thanks for the correction.
3 Likes
@Dukejohnson the purer the diamond are, meaning higher thca potency %, the longer is required to fully decarb. Consistent heat over a longer period of time will decarb.
Just Melting the crystals doesn’t mean its fully decarbed. It will renucleate
3 Likes
I understand this but is jizzy d9 just poorly decarbed diamonds always? I let mine go like 12 hours and never looks jizzy so I’m thinking yes.
1 Like
Yes, I did a little test in another thread 300c @ 10-15 min then posted a pic 9 days later
7 Likes
2 Likes
300 C damn hope it was blanketed
Huh you ok ?
Patience is a virtue !
It s somehow funny when you react this way
2 Likes
Just hot plate temp. Actual temp much lower
2 Likes
Seems he got the point quick enough. Maybe @cyclopath should reply with this much authority all the time
3 Likes
The diamonds coming from them are very clean…you could go much higher than 300 and still be ok.
Only degradation I’ve found would be volume/weight loss.
Which we all know occurs during decarb…*avg like 12% much more if you go till no bubbles form.
I’ve lost much as 25% when not paying attention.
Whoever making the thca is doing a good job. 
Never had any this clean. (May be CRC …but they’re doing a heck of a job)
S/o to them 
whoever they are.
Please do not spread wrong information
You will not be ok heating thc-a or thc
To 300 C for any amount of time if not under vacuum or under an argon blanket dependent of time at these temps certain quinones are beeing formed of Wich little is known
As well as certain compounds deu to disintegration of the thc molecule
There is no need to heat to 300 C in open air and thus not advisable
13 Likes
Usually 160-180c on hot plate does just fine for me
3 Likes
between 260-270f worked fine