Well. On behalf of the majority of the CA industry, I’d like to send a big fuck you to all yiu Oklahoma transplants.
But after that, I’d like to sell you some equipment.
After painstakingly cleaning everything, this lot of equipment is out thet way, available for sale outside Tulsa.
My man on the ground there is unavailable for 5-10 days, but we’re taking offers on stuff now.
FOR SALE:
- Pro Refrigeration m45a 12.2hp compressor recirculating chiller, capable of -43c @10.9kwcooling capacity
-Been through all the julaboo and huber models oover the years, and this thing kicks their ass. It’s a brute force unit. But if you’re volatile, all that aerospace level precision on the german models just results in issues. This bitch dooesn’t go down.
-had a large volume setup, but never saw it get below -38c
-we were averaging over 3.75p solvent per minute with straight n-tane. With a heat exchanger cycling 50F water prior to uor main HE, this thing kept up for sure. Even with our Corken t-291 pump pushing out 170F gas
-
https://prochiller.com/wp-content/uploads/2019/08/M45_SpecSheet.pdf
-American company, and built like it.
-3phase
-Paid over 65 for it new, during covid.
-Capable of delivering unit to most places towards the West Coast, and certainly discreet.
—DM OFFERS.
2.) Nitro Generator, Air Compressor, and Storage Tank. South-Tek Solutions N2-GEN-04CPx-P-WH nitroo generator w/ epic 3ph air compressor, air drying system, storage tank, and all te bells and whistles.
-Generates 4.8SCFM of nitro and maxes 100psi.
-We supplemented when we needed a bit more pressure with tanks and a 3way valve.
-High-Capacity Nitrogen Generation System - Compact © Series N2GEN
-In the whole package over 22k.
3.) Parting with a bunch of ovens.
-11 AI5.0 Non-ULA 220v ovens. All less than a year old.
-15 AI3.2 non-ULA 220v ovens. With additional customo shelves to handle both 6 and 9 shelves.
4.) Edwards E2M80 57CFM vac pump. Beast.
5.) Edwards dry scroll XDS10. 30 days old
6.) Customized 8 column Xtractor Depot 8 column system. All swaged fittings.
7.) Corken t-291 recovery pump w/ lots of spare parts.(will even offer a couple months of tech support on unit)
8.) 18 6x48” columns along
10.) 1.5 year old MVP-6 Recovery Pump. Just rebuilt it. Never used afterwards besides a couple min to test the rebuild. 0 hours on rebuild, and comes with another spare set.
11.) 260p ASME Xtractor Depot Solvent Tank. (this one)
260lb ASME Solvent Collection Tank | Xtractor Depot
12.) 260p XTRACTOR DEPOT Solvent Tank (different Thant he one above. last year’s model… taller.
13.) Massive tear drop shaped Xtractor Depot Solvent tank from the Titan 40
14.) ideal hanging crane scale for accurate measurements…(corken vibrated too hard for the pallet scales we tried.
15.) c1d1 flow meter w/ LCD touch screen
16.) a dozen different 6" sintered discs
17.) 12 nitro T bottles. (the big ones)
18.) 2x bhogart horizontal bases w/ 4" cone reducers
19.) soo much other stuff. Will update this tonight.
examples: 4" columns, 4" jacketed columns, ffilter plates, collars, etc. 6>2" reducers, 4>2" reducers. unused column socks,
buttload of 3/8 valves, even more 1/2" compression valves ton of brand new 1/2" fittings, new and used…elbows, t’s, crosses, etc.
ADDITIONAL:
a.)Bhogart 8" explosion proof w/duct
b.) Bhogart 12" explosion proof w/o duct(unless I find it)
c.) Bhogart 16" explosion proof w/duct
d.) 2x 6" caps with 1x 3/8 NPT
e.)3x 6" caps with 3x 3/8NPT
f.) 50x+. 6" collars
g.) 5x+ 6" caps with 1,5" TC
f.) 10x+ 4" collars
g.)13x+ 4" filter plates
h.) 1x 6x24 column
i.) 18x 6x48 columns
j.) 9x 4" columns
k.) 3x 6x36" columns
l.) 1x 4x24 column
j.) 4x 3x24 columns
k) 1x 3x18 columns