I have to know …is this the 97g one my buddy just showed me on IG? I said hmmm looks familiar
I’m trying to get it at 100+ g currently it’s lole around 50 g
So how do i get this puck out in tact? I nvr tried before i would just usually make applesauce with sugar
Lol, I did but they are to big for my lil split pours. I just tried the warm water bath and i think it made it to soft and it didnt come out in one piece
Sweet mother of Pearl…
You, sir, have mastered the art of the JawBreaker.
How many times have you used it to regrow?
Here’s a couple recent stones
lemon drop should be lite yellow, your fired
didja mean me? Probably not, but here:
Full credit to Otscc(@otsccprime) on @future4200, #GoodLifeGang, I see you and thank you for everything!
Shoutout @otscckingkom710, thank you for your hard work developing, perfecting, and most importantly RELEASING the #OTSSTek
Not blowing smoke. Fuck the hype, fuck the lies.
First things first, a few posts back I got requested for the tek that I am using to grow these massive #WizardStones…
Here is what I did, in detail. Ask if you have questions.
No Cryo. Little Pressure. Lotsa Burping. Hella Patience.
Step 1. Dry weed bone dry, continuously grinding it up in your hands until it is 0%.
Step 2. Pack your tubes efficiently. No airpockets. Equal Pressure throughout tube.
Step 3. Achieve cold temps for 24+hr. I did 72 due to scheduling issues.
> I’ve collected a bunch of gelpacks and a few styrofoam coolers.
I emptied the gel packs into the styrofoam cooler and poured in
500ml of 99%iso making a slurry inside the cooler. I then put that styrofoam cooler into a larger
igloo cooler, which was then placed inside a chest deepfreeze. Using a temperature gun,
I confirmed I hit -78celsius.
(optional if extra supplies) - Then freeze with empty tubes to create groves. Remove tubes once frozen.
Step 4. Put your now frozen tubes in the matching groves in styrofoam cooler. Continue Freezing. I did 72 hours due to scheduling.
Step 5. Blast as per usual. Most people will be rocking closed loops and frozen solvent tanks using dry ice. I did not freeze my solvent and I open blasted,
as per usual. Im broke, yo. Make the most of whatcha got. Anyways, I did not freeze my solvent due to it is London, which has a seam on the can
and I’m cautious of a mastercase exploding on me once the gas has converted to a liquid. Again, too poor for puretane and samesame.
Step 6. I dont recall exactly, but I had one chance, so I ran like 6 cans per ounce which is like 2.1-2.3x the amount as per usual on a nug run shatter slab.
I used a 500ml WideMouth Bernardin Mason Jar. Butane is 300ml/can, so I poured, and degassed in a hot water bath. Blast, Pour, Degas. Blast Pour Degas.
Think that’s redundent? I yielded like 7g off 56g, so I am very happy I did it this way rather than using a larger based jar!!!
Step 7. On my FINAL tube, I took it slowly. I remove jar from heat around 30% full and let it degas down to 25%/100% on the jar fullness level!
Again, Jar was 500ml WM! At this point, with solvent in jar 25% full, I cap the jar and throw it into my homemade cooler in a cooler for like 7 days.
This is called Blooming your Thca crystals! I intended on 4, but schedules overlapped and 4days ran into 7 real quick!
Note–> If ‘Slurry’ of butane/resin is TOO thick, you will not be able to BLOOM the thca!
Step 8. During those first 4 days on day 1 and day 2 I burped it once or twice, I don’t recall 100%… I went based off the lid, though.
If the lid had 0give at all, I popped her. Especially since I read over 1000 comments on the original OTSS thread on future4200.com and pressure
was not as relevant as MANY other instructions I had seen… Cha-Ching! Burp her(jar) to ensure it doesn’t explode!
Step 9. So after the 7 days I removed it from the freezer and I placed it on an 85F heat mat, inside an unpressurized vac chamber. DO NOT PULL VACUUM BUT CHAMBER IS ALSO IRRELVANT!
Step 10: On day 14 you may not see shit. Continue checking the pressure throughout the first 14 days! Do so my pressing the top down!
Day 21-24 is when I seen the Crystals fully clustering… I did not use any spawn crystals, either.
This was all done on May 19th @ 1:30AM (capped). It is curently 1:30AM on May 19th, exactly one month later. Growth takes time. Be patient, but don’t neglect.
P.S - From what i’ve seen scratching your jar is a myth that results in jars exploding. I wouldn’t suggest it, lol.
when you say you’re growing massive stones with this method, how big are they? could you post a pic of your end result?
Back when I was open blasting I did a very similar process, and only ever ended up with 1cm sized stones at their largest.
What you’re making arn’t wizard stones