Item Model/Manufacturer: Pope 4" and 6" Glass Cannabis Stills
We have three 4" and one 6" glass stills available.
One of them can be setup with the output pumps for both distillate and residue.
All of them are currently setup for feed pumps.
We have these and various other Pope parts available.
Various heaters, chillers and vacuums for these units as well, we can set it up as you like.
Reach out and we can get you a system quoted.
Bump!
Got these ready to ship if anyone is interested.
We also still have one 6" stainless Pope as well, with the feed and two output pumps.
DM for info!
Bump!
Would like these sold asap, will give a killer deal on the glass Popes.
Bump.
Got these Popes available.
Bump. Need this 6” stainless unit sold, new chillers and Immersion polyscience as well as cold traps on this unit. Vacuum is a new rebuild as well.
Dm for more info.
Someone take the 6” stainless unit or its going to become a water fountain installation 
Bump.
Both units still available.
Few 4” glass units and a 6” stainless pope w/ output/feed pumps, and a new cold trap, newish chillers (10 hrs on them), and newly rebuilt edwards vacuum. 6” unit comes with various rebuild kit parts/seals as well
Prices range from $35k-63k for various sized packages, we definitely have the cheapest high quality wipers available, assembled here in the USA. Full parts support and training/installation available.
Bump!
What up! I saw you had posted about the e-4k from illuminated wanted to see if I can pick your brain on the system illuminated is 0 help.
Welcome to the future @UTS505!
Interested in the 6” stainless pipe. Still available and if so how much is the ask?
Welcome to the future @TrudyKai!
Wow that’s odd, The guys at Illuminated were pretty cool. Then again almost all OEM vendors leave more to be desired regarding operational/day to day issues.
Got a few months run time on the e4k machine. I have a few experienced/trained techs I can send your way if you need some on site help as well.
Email me Rohan@ldt-works.com
Don’t mind chatting over text/email for small inquiries.
Anything more we can chat consult/advisory rates if you need operational/procedural assistance.
Bump!
Stainless 6” with new cold trap and OEM (Julabo/Polyscience/Edwards) ancillaries.
It will make someone a ton of distillate, and has only been used approx 140-300 hrs.
TONS of life left in the unit, it’s essentially still near new and it shows/performs as such.
We can throw in this BRAND NEW ULVAC Diffusion pump as well, to sweeten the deal.
This machine will RIP on final pass with the ULVAC.
Email or dm us. Rohan@ldt-works.com
Bump!
Will discount this for anyone interested.
Includes a diffusion pump, rebuilt Edward’s, and a TON of spare parts, extra Pope glass parts, heat tape spares, etc…
In the $65k range shipped on 3 pallets, but can work on price depending on ancillary setup.
Chillers, heaters, and other ancillary are all near new, only a handful of hours of use on the unit. Less than 72 hrs of use time.
This was our demo unit.
Extra large heated feed vessel, 15-20l crude capacity. Recirculation/2nd pass swagelok hard piping is present.
