Mendocino co ca.need help with crc and mining including a diamond miner.

[Sapper502]

Have you read through all of these?

Crc diamonds hot jar tek

start with your SOP for regular crc extraction I run a coil prior to injection i have ran room temp solvent with decent result . I just run regular ice in the coil for a happy cost effective middle ground instead of dry ice . Temp gun says solvent gets between 0-5 F For indoor i use 1 cup B80 per pound , light dep or really high end outdoor 1.5 cups , and 2 cups for regular outdoor or aged older material followed by a thin layer for celite below the B80 to prevent powders slipping through. I …

Only The Strong sauce tek

Start by chilling your material columns. With open sleeved jackets a dry ice/ 99% isopropyl solution will reach -110, and with closed jackets liquid nitrogen is appropriate. Chill the solvent tank at this time as well. Once you have reached and are holding desired temp while also maintaining vacuum it’s time to prime the system. We do this by pushing warm vapors from another solvent tank into the system. Turn on your recovery pump and open recovery port on your cold tank, allow it to build a bi…