Hey everyone,
Currently building out a few facilities in Europe and looking for some gear, Im in the need of a falling films, rotos, wipers, vacuum ovens, chillers, heaters, etc etc pretty much whatever I can get, looking for stainless process vessels aswell.
Need quality gear. I have everything I need to operate already but looking to scale further and support some of the large scale pharma gear we are currently deploying.
willing to buy out entire spots if ya got a nice setup.
Send me a DM.
I’d contact @Dr_Jebril
https://Alplant.ch they do a lot of testing/products so I’m sure would be a good reference on knowing a lot of labs that send them samples. Doesn’t hurt to ask @Roguelab either!
Welcome to Europe !
And this is when the prices in the eu will start colliding 
As for gear !
Falling film fly it in from the USA even with aircargo your better off than searching in the eu
For roto s go chineese keda has a bunch in eu as does the other seller who s name I forgot
Not much on sale at the moment and prices are ridiculous even used
As for vacuum ovens they are cute but missable at working at scale get a vacuum tumbler instead with cooling capacity and run a inverter chiller on it Wich will be able to get it to 45 C
Revurse unloading is also a nice feature
As for chillers there are not so many on sale that can get below -20 C
But there are two -65C (R23) cascade systems on sale with 30kw power
Let me know Wich temp you require
As for heaters check the company s that I will post see what’s in stock
I ll post from $$$$$ to cheap company s so you know
As for glass vessels let me know what you need and I ll check 100-400L vessels that is
You can hit me up if need help. Sourcing things
For triclamp parts only one dealer I know of in NL
Danke @Roguelab
Much appreciated I’ll check out these links 
Does it all need to be up to spec for EU GMP commissioning, qualification and validation?
Well yes gmp is a higher qualification than process
But most equipment works
Air cargo is realy affordable when time is crucial and with so much gear up for grabs in the USA well worth looking into
Fuck this is rough, you’re very helpful and seem to be killing it in your area. But is this the availability of equipment? I would’ve thought with the proximity to China and the fact that almost everything available in the US actually comes from there it would be better.
There s a lot more but scattered around
And site s like machinio.com and used equipment sites are available
England has a lot yet since out of the eu a bit more complex to get
Language is an isseu thou since many small sellers only place there goods in local language and searching in there language and then beeing able to read the spec s is hard
But as for gear used in the cannabis trade there is very little
If you need roto contact me for buchi r210 with controler
Knowing @RockSteady his minimum volume of anything is probably 50L
And more likely gallons 
The American way more Bigga more betta
And probably the only way to make a living nowadays s scale or don t survive
Pretty rough times even in Europe
Where a lot off reagents are controlled
And the fines of environmental damages are so high that the time in prison is peanuts compared to the
Economical hunt they start once caught
22 years after and I am still paying every month or get held hostage in a prison for a maximum of 3 years at a time 3x so 9 years total and the fine still stands calculated at retail price on the street so be carefull out there
DM sent
