Carted up a few hundred grams and half grams of some terp mixed distillate with x2 different flavors and we have leaks and plugging issues. I’m sure I mixed the % too thin (was aiming at 7% mix but the distillate was already somewhat viscous) so is there a way to burn off some of the terp with the oil already carted?
Leaks - about 20% of our carts are leaking out the bottom. Mostly Terp A.
Plugging - many complaints of sucking the oil through the aperture holes and up through the vape straw into the mouth and tasting the oil. Mostly Terp B.
Hello @Zyzyx Sorry to hear your leaking and plugging issues. From your pictures, I can see the oil inlet hole is too big, also the oils seems too thin, which may cause the leaking problems.
If you still need any alternative vendors, I would like to send you some samples of our V22 Ceramic Cartridges.
Product Specifications
Reservoir Volume: 0.5 & 1.0 ml
Thermo Resistant Glass Housing
Varying Inlet Sizes Available to Customize Vapor Feel and Taste
Height: 3.9 in / 2.3 in (10.5 mm / 65.9 mm)
Diameter: φ0.37 in (φ10.5 mm)
Weight: 0.36 oz (10.3 gr)
Ceramic mouthpiece bullet tip and duckbill-shaped
Thread Top Mouthpiece
Coil Resistance: 1.4±0.1 Ω
Hello, it’s obvious that the parameters of hardware is not suitable for your oil, we can suggest you right voltage and oil inhale parameters to fit your oil. Also, you can believe that our products have passed rigorous inspection both inside and outside our company.
Welcome to dm me for more details.
