The road turbo is one of our smallest machines, it runs on two 091’s and does not really get past 5lbs per minute. This unit operates on 12lb of solvent so I want to stop at 1-2lbs residual. Again, typically we have cannabis clients run 70/30 for easy pour-out, then it simply crashes on its own overnight. This provides the liquid pour outs everyone is used to.
Fresh frozen is kept frozen until the end of the run, same process as dry except we don’t heat the bio. Live does see a little higher solvent loss because of this.
As for the water, like @Waxplug1 mentioned, there are better ways. It was interesting to see he was working on the same methodology we are going after. This is not something new but definitely new to our industry.
Great minds think alike. I was tired of dealing with water freezing up in my coils or dip tubes. That’s what got me to start looking into other ways. I also have another idea I’d like to bounce off you on how to speed up recovery with even less energy
So the designers of the machine could only get 25% of the runs to come out correct?
How many runs have you guys done on this machine? Why is it so unreliable?
We’ll it’s like John said, with propane you got seconds of a window. Imagine trying to catch that window while answering questions during the demo. With 70/30 you can get it every time. He used propane because I wanted to see how it could separate the HTE from the THCa as it pours
Got caught up in conversation each time. But also we typically do this process in the multi-use column so there is more control. In this instance, it was used for CRC so the GD1 was utilized instead.
I can test it. The material was some older trim tho. I wanted to see what a shorter chain hydrocarbon like propane would do without crc. The color came out like crc which usually would’ve been black with butane
thanks, just looking to see amount of cannabinoids and terps leftover in the biomass after the extraction especially with lowest solvent to material ratio in the industry.
I don’t know why me tagging the owners about this 2x hasn’t been responded to by them.
I remember running my first bhogart in 2014 with 100% P and getting a very clear separation of terps and cannabinoids in the collection pot with every run. We always called it cornbread and honey lol.
We have tracked plenty of data at our local facility running the Behemoth on hemp. In the past, I have also tracked runs with my GC to see what the best ratio is for propane. Along the way we learned some interesting things about it’s solubility to various cannabinoids.
I am not actively over there so I can see what they have on hand these days. It is very important data with large volume processing.
Do you have any of Solent Direct’s Hank the Tank swag. Hands down, some of my favorite marketing in the space. I’ll bet @BigM would get you a shirt and some stickers.