okay so i filled up this cart and a couple others a little more then a month and a half ago and i unfortunately had went too jail and once i got out i checked on them and I seen the top layer started too get dark, from what i understand it is oxidation but i had then put away in a closet where it was room temperature and no light could reach, is there any way too prevent this like maybe putting it into a freezer? this isn’t a dud i made about 20 piece test run and they all ended up like this. I’m trying too get the process perfected before i start filling up bulk amounts but any help would be appreciated.trying too figure out how to prevent it as they were a nice golden color beforehand. (ignore the specs i have acquired syringe filters that do work and solve that problem which stems from the oxidation itself on the top layer of the jar of distillate almost crystalizing) i just need too figure out how too effectively store them because i have a lot too fill up but i can’t afford too have them go bad while sitting in only about a month or 2 time. there’s gotta be a way no? i’ve seen carts sit for longer with no change in color.i’ve been doing research and i’m a little hesitant onfreezing because i’ve seen some say it does help and some say it speeds oxidation up. i had seen some say oxygen absorbers/silica gel is a good alternative and also vaccum sealing. i was thinking maybe vaccum sealing them and leave an absorber in the pack for storage until they are about too be sold? i was also thinking besides the storage aspect of it its a possibility i heated the wax too hot when i was handling it as that could have sped it up but it still lasted a few weeks just fine but when i went away it’s when i came back too it looking like that.any help would be greatly appreciated.
1 Like
Hey Moneybagzzry, the oxidation only happened to those same devices?
i mean those are the only ones i filled up so far and all of them oxidized like that in the picture the top layer
Minimize Oxygen Exposure
Optimal Storage – Keep in a cool , dark place with airtight packaging.
Proper Filling – Avoid overheating ,minimize air bubbles.
Use High-Quality Hardware : postless designs reduce oxidation risk ,no touch with metal components
1 Like
post a picture of the input material used. Specifically looking for the top layer of oil in liter jar. Is there a big difference in color?
2 Likes
yes there is
what does that mean