BBELL LAVA CORE Handheld Semi-automatic Temperature Control Oil Filling Machine/Filler Gun
Filling Capacity:
25ML:0.5/1.0/1.5/2.0/2.5ml
25ML:Only for 0.3ml
25ML:Only for 0.4ml
50ML:1.0/2.0/3.0/4.0/5.0ml
50ML:Only for 0.8ml
Features:
1.Using internal heating rod forheating
It is an exclusive patentdesign. After the heating rod is put into the tube, it can reach the settemperature only after several seconds, heat the liquid, and keep the constanttemperature effectively.
2.Design of larger oilinlet/outlet nozzle
The customized large caliberoil inlet/outlet nozzle makes the concentrated or thin liquid pass easily.
3.360° transparent tube wall
The all-round transparent tubewall is convenient for monitoring the status of liquid in the tube at any time
4.Easy to operate–More efficient, Easy to carry,Saves time & labor costs.
5.The price is cheap and the High cost performance
How to Use :
1.Take out the product andaccessories from the package, and prepare the concentrate/distillate withappropriate temperature.
2.Connect the oil gun to thetemperature control box, tighten and fix it.
3.Energize the temperaturecontrol box, and switch it on. The red light is always on.
4.Set the constant temperature(green value) on the panel of the temperature control box. The red value is thetemperature of the heating rod in the gun. When heating, the green light is on.
5.Press down the release key,hold the gun tube with one hand, and pull the push-pull rod with the other handto suck the concentrate/distillate into the gun tube.
6.Erect the oil gun, let thebubbles move to the top of the gun tube, and pull the handle to release thebubbles.
7.Install the pinhead well at thegun nozzle position, and get ready. Note: Please do not make long heating under conditions of equipment idling.
The oil cylinder is PSU material, the heating rod is stainless steel, and the silica is also food grade, which is very healthy and can be used for a long time before -100~175℃
PLASTIC SYRINGE TUBE!!! get that cheap ass allflex syringe outta here. no one likes petrochemicals leaching into their heated terpene mixtures. your syringe tube is not designed for terpene mixtures! IT WILL LEACH PETROCHEMICAL BYPRODUCTS INTO THE OIL.
Per Allflex these amber colored barrels are made from Lexan Polycarbonate
not a good design for heating and using terpene mixtures. they are autoclavable but whats not talked about is the leaching of petrochemicals into the feed stock when the barrel is heated. just because its autoclavable doesnt mean its meant to have food grade feed stock pass through it while its being heated.
Thank you very much for the advice, but I recommend cleaning with rubbing alcohol and water instead of isopropyl, as isopropanol is toxic and not edible.
