I mean, who cares what it is? It’s not THC, clearly what I’m looking for. Sure, it’s CBG, CBD, whatever. Not trying to be a dick but doesn’t seem relevant. Maybe I’m missing something though. Maybe you were gonna tell me something great if it’s CBG. Idk, it’s not THC so I’m fucked.
3 Likes
When everyone bitches that they aren’t high and I smiled it myself and wasn’t high… I’d have to take it for what it’s worth and say it’s VERRYYYYYYY low THC if any at all.
1 Like
Could you name any brands or post a link to that specified butane? I’m just clueless on any of that. That’s why I steer clear of extractions. Just not even Close to being in the ball park of educated when it comes to that.
Pentane would probably be easier to deal with but i doubt you would be able to get that gasoline smell out of your buds easily. And im sure you would have to purgw it so long you would lose a lot of moisture. Butane is the way to go in my opinion.
Buy one of those tanks and a jic hose, it will make dispensing the butane easy. You can pretty much just put your distillate in a jar and add some butane to dissolve. Get your mixture the consistensy you want and get a glass turkey baster and drip the solution over your buds over drop by drop.
Your going to need to do it in stages, that is you meed to drop solution on your batch and then allow evaporation before lacing it with anymore. You dont want thw buds to get soggy and you dont want your solution so thick that it bubbles up on the outside of the bud when you apply it, you want it to be thin enough that when the butane evaporates it coats the nooks n crannys. You can always add more if need to and this helps with the quality of the smoke of the bud your lacing.
Thanks for your help man. I appreciate it a lot, so this isn’t something you could do with a case of butane from a head shop? Even their most refined shit?
I personally would advise against using butane if you don’t have a vac oven.
Your buds are probably gonna be crap looking after that process anyway.
I’d just roll it up into joints and smear the disty on those lol. Make it easy and you can probably still make money.
2 Likes
You could, just be a pain in the ass that way and more dsngerous to boot. But you could get a refrigersnt can tap from the auto store and fix it up that way as well, i just wouldnt reccomend you do that.
If you dont have any kind of vacuum chamber then this wont work well. As the butsne evaporates your buds aee going to get coated in ice if they are left to evaporate in atmosphere, evaporation needs to happen umder vac for this process to yeild something decent.
Please don’t try anything with butane in your house, or near any source of ignition! Hate to be the one that brings it up, but @trapped says he has zero extraction knowledge, and just joined. It’s easy to forget that some people might not have a clue of the hazards of what we are so used to. Safest bet for a non lab type of person would be freezing the distillate, crush it, sprinkle, then heat gently to melt in, after which one could dust in kief for moonrocks. If you want a more homogenized product, grind your flower, then add crushed frozen distillate, mix well, then warm to melt. Fill pre rolls, make money.
13 Likes
Very good point.
Thanks for your input @BigM but I do know that much lol. still good advice man, ya never know.
1 Like
His advice about freezing it is a viable route, never thought of this. @BigM Smarty pants.
@Roguelab is this in tricks of the trade yet?
4 Likes
@ScoobyDoobie my preferred method so far and seems to be the easiest is the ethanol method… but how against that method are we?
I know you have steered pretty clear of going that route. Just seems to be the most accessible method so far for me.
It will take longer due to rhe higher boiling point and due to the polarity of the alcohol, it will dissolve the chloroplasts releasing chlorophyll throughout the pant material that is the bud as well as dissolving the water thats contained in the buds. This tends to make for a very harsh smoke.
Butsne can still penetrate the cell walls but its not going to take as much water when it does. (I think)
1 Like
Sure 
2 Likes
Guys, OP has no experience with solvents. Lets be realistic here. This could get a lot worse if done incorrectly.
Best case scenario is you make moonrocks with a VERY generous amount of distillate/decarbed shatter on it. As long as the THC content is sky high, no one will care if it’s hemp buds underneath. Whether or not you want to be transparent about that is your call although moonrocks with 40% thc and 15% cbd or 0% cbd is not going to disappoint anyone because it still has 40% thc. Just use some fire kief and go heavy on the distillate. Price the product generously, lower than you otherwise would because that’s what needs to be done. You’re taking a loss on this one, just accept that and learn from it.
Don’t continue the cycle and lie to everyone you know because you trusted the wrong person on a huge investment. That was your mistake and yes it sucks but you’ll be no better than the person who did it to you if you continue to scam. Best thing you can do here is try to recoup your loss and moonrocks are the only way I can see this being done both safely and ethically. Don’t start playing with explosive solvents and putting your friends at risk because you got yourself in a bad situation. Just my two cents. It sucks but do the right thing.
I know we all want to find the “best” thing to do here and yes science could absolutely solve this issue with an adept understanding of chemistry. But the OP has made it very clear that he is not comfortable with solvents. Let’s not make it out to be simple/risk-free because it’s not. I know we have the brainpower to fix this and that’s what Future 4200 is all about but that doesn’t mean we should encourage someone to handle chemicals they are not qualified to use. Unless someone plans to fly out and do it for the guy
10 Likes
The idea wasn’t mine. It came from @Thetetraguy from another recent thread first.
I’d second it for a trick of the trade. 
4 Likes
If you have to, heat ip the disty and aply witha dine quality brush. Just like they do for pre rolls before being rolled in kief
Place it in the T of The T tread
1 Like
so you bought 10p and the guy died?
it sounds so unlikely I think it is more likely youre wondering how you can turn 500$ pounds into 1500$ pounds and looking for ideas
but wtf do I know im just a paranoid freak
Anyway freeze distillate and crush it then put the dust onto the flowers
24 Likes