I can’t find the article, but here some of the dirty peectures:
2 Likes
Can you tell us (some of) what is wrong with this setup?
1 Like
Well the most obvious is
Is that a water heater racked onto it? Shouldnt that be in a diffrent room with hoses going thru the wall
2 Likes
Yep. It’s rack mounted. this is the primary igniter in there (the thermostat)
The chiller is also plumbed in right next to the rack, the relays in there are solid ignition sources…they are also the closet ignition sources to the floor.
But I would say the most egregious problem is the (in use) electrical outlets.
Accidentally pulling a cord out under load is guaranteed to cause sparks
1 Like
Yikes, water heater in the same room? Dude is lucky he hasn’t blown his shed up.
2 Likes
Well i dont know much about water heaters but for my setup i was planning to use a instantaneous water heater with a water pump attached to it and not one of those water heater as seen in those pictures and also i was planning to put it in the other room with hoses going thru the wall is this a bad idea or?
1 Like
Actually racked to his pipe bomb…
Which is the correct response.
3 Likes
i dont have any electrical stuff in my extraction room just the light and thats ATEX so that should be safe enough to be there
1 Like
See; In hot water... and follow the links under the first post as well.
Eg: Let's see those tankless hot water setups!
Should get you tips/tricks/plumbing
1 Like