make / manufacturer: Labconco
model name / number: Protector Xstream
size / dimensions: 96"x
• Aerodynamic design minimizes the exhaust rate necessary for containment for greater energy efficiency
• Meets and exceeds SEFA 1 standard for high-performance fume hoods
• Upper Dilution Air Supply provides passive airflow behind the sash to remove fumes that accumulate in the upper portion of the hood
• Tapered slot pattern on the Opti-Zone™ Baffle provides increased airflow at work surface level and center of the hood, where most fumes are generated
• Secondary Baffle Plate, hidden behind the Opti-Zone slotted baffle, guides airflow downward for smooth transition into the rear exhaust plenum
• Clean-Sweep™ Sash Handle has small cut-outs that channel additional inward airflow along the edge of the sash, pushing fumes away from the operator’s breathing zone
• Eco-Foil™ Air Foils are curved for operator comfort and improved aerodynamics, lowering energy usage
• Vapor-proof LED light fixture is sealed behind ¼”-thick safety glass to eliminate spark potential
• Open-bottom design allows for placement on any work surface or on a Labconco base stand
• Fiberglass-composite interior for chemical-resistance and low flame spread (less than 25 per ASTM E84)
• Sash stop allows 18”-high max clearance
• Controls for lights and blower are ADA-compliant
• Front and side panels are removable; utilities plumbing accessible from the front
• Protector XStream accessories can be retrofitted using Labconco kits for service fixtures, duplex outlets, Guardian Airflow Monitors, and Sash Stops
• Requires connection to an existing exhaust system with external blower (separately available)
Has two service fixtures
96" length (Exterior Depth)
$4000 per there is 5
Contact
Brian
623-806-5254