Good day Futures
So I am trying to do the xtal thing but I only seem to make a puck on the base of my jar.
Would hexane be the next option to dissolve and Rex?
Pour off the top layer and dissolve the puck?
To make big chunky dimes you need a “more pure” extract.
The more shit in your extract besides terps cannabinoids and solvent the more issues you will have. Pouring off the liquid after it has pretty much crashed out and recrashing the sand in pentane works great for bigger crystals
3 Likes
Go slower on your evaporation
4 Likes
This is what I was going to say.
Also 70/30 likes to make smaller facets.
6 Likes
Thanks for the replies guys.
I have made a jar in the past where I attached an adjustable PRV to it, but wasnt sure if that helped.
will do it again.
Now the material I am using is bit older etc, and I dont have a CRC column just yet. ( working on it)
In the mean time can I put a mixture of celite and Activated Alumina in the bottom of my material column above a stacked felt filter and filter paper section?
I feel if i didnt have as much other shit in my extract I would also have a better end result.
2 Likes
Do NOT put hexane in there unless you plan to purge the hexane forever and then some more.
Pentane is better.
2 Likes