Hello I’m running a dual 5 inch wiper built by Toption (China). I’m looking for baseline temps that have worked well in distilling D9 converted Liters.
Two 5 inch columns with a internal condenser in column 2
SO three temps
Column 1
Column 2
Condenser
1 Like
120 hopper
120 residue
95 internal condenser
192 first stage evap
195 2nd stage evap
That’ll be 10k please
Dial feed rates such that the residue comes out of the 2nd stage and solidifies into a hard obsidian like material, if it’s sticky at all then you are leaving behind cannabinoids.
Also on multistage systems; If you step up temps from the first too the second stage, you have better results, you “squeeze” the material more and force out more cannabinoids. the temp change doesn’t need to be drastic, but an extra few degrees on the evap,( and IC if you have a dedicated heater for 2nd stage IC) can improve yields quite a bit and ensure you get everything worth anything outa the crude.
12 Likes
Thank you I’ll Try this out
3 Likes