Located in Grass Valley California
PM For pictures/ questions
Indoor Condensing Unit 3-1/4 HP $1300
Low Temp, R404A, 220V/1PH
AssembledIn USA with QT AVA2512ZXN Compressor. One Year Manufacturer’s Warranty.
Dimensions:38-5/8’‘L X 28-5/8’‘W X 22-1/8’'H
Description:
All units charged with ester oil and dry nitrogen MCA and MFS ratings denote Minimum Circuit Ampacity and Maximum Fuse Size BtuH capacity ratings below are based on 90°F ambient and listed evaporator temperature
B/M: 2B3144-9; Refrigerant: R404A; HP: 4; Volts: 208-230/1; BtuH Capacity @ -40°F Evap.: 5,131; BtuH Capacity @ -30°F Evap.: 7,791; BtuH Capacity @ -20°F Evap.: 10,905; BtuH Capacity @ -10°F Evap.: 14,475; BtuH Capacity @ -5°F Evap.: 16,488; BtuH Capacity @ 0°F Evap.: 18,500; BtuH Capacity @ 10°F Evap.: 22,980;
Compressor #: AVA2512ZXN; Min. Circuit Amps: 29.0; Max. Fuse Size: 45; Suction Conn.: 7/8" ODF; Liquid Conn.: 3/8" ODF;
Pressure Control: Low & High; Receiver Capacity Lbs.: 12
Product Specifications
B/M 2B3144-9
BtuH Capacity @ -10°F Evap. 14475
BtuH Capacity @ -20°F Evap. 10,905
BtuH Capacity @ -30°F Evap. 7,791
BtuH Capacity @ -40°F Evap. 5,131
BtuH Capacity @ -5°F Evap. 16,488
BtuH Capacity @ 0°F Evap. 18,500
BtuH Capacity @ 10°F Evap. 22,980
Compressor # AVA2512ZXN
HP 4
Height 19.5"
Length 25.0"
Liquid Conn. 3/8" ODF
Max. Fuse Size 45
Min. Circuit Amps 29.0
Pressure Control Low & High
Receiver Capacity Lbs. 12
Refrigerant R404A
Suction Conn. 7/8" ODF
Volts 208-230/1
Width 33.6"
Wt. Lbs. 222
Neslab HX75 Recirculating Chiller $3700
This chiller is in great condition. We were using it to chill some equipment here at the shop for a while (A Transmission Electron Microscope) and it has been very reliable.
Due to down sizing tho, its time for it to go.
Specs:
Temperature Range: +5°C to +35°C
Temperature Stability: ±0.1°C
Unit Dimensions: (H x W x D)
Inches: 36¾ x 23¼ x 18¾
Centimeters: 93.3 x 59.0 x 47.6
Reservoir Volume
Gallons 5.0
Liters 18.9
Pump type: Turbine
220 VAC at 10 Amps
EcoPlus Commercial Grade Water Chiller 1 HP $1400
Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing
50lb steel liquid co2 siphon tanks (one year old)
$400 each obo
New Raw Thumper pre roll unit $3200
40hp phase converter $3500
MVP Recovery Pump - Liquid $7000