This is legendary.
getting 100lbs dry ice in the morningā¦
gonna run de bed w w1 . I canāt wait. I have large open jacket column now . Iām hoping itll help clean it before it goes through and filterā¦
also I may do run using just the open jacket column as my crc column sinxs it huge. then I can keep powders cold whole ttime
chemtek @Waxplug1 for the terp keeper win without having to find the right mix with t5 and silica
skip some.wasted time go straight for waxplug1 chemtek
Iāll pull for them any day fhe week now.
also Iāll post pics tomorrow
7 Likes
well we will find out w2 on the way!
whatās suggested for w3 use
Depending on the filtration you are using, you shouldnāt have to regulate flow. Going from 20(paper for clean up)/5 micron disc/2-1 micron /then 0.2. You can regulate the flow that way and not need to throttle your valves.
I put the paper above my disc to make cleanup easier, doesnāt change the flow rate at all. Seeing how going through most media is deeper filtration than 20~ micron.
Are you still stocking the amorphous silica, or did you find a different kitty litter?
5 Likes
The one i got is an attapulgite clay. I believe i got the middle size of the 3 options they offer.
2 Likes
Iād give it a whirl and try some
Below the 5micron sintered disk are you using 1 and .2 filter papers or additional sintered disks?
The 0.2 is a disc
Hi Iām currently using Media from Luna. I was wondering what other vendors are out there. I have already contacted Media bros and Luna tech. Please kindly assist thank you.
1 Like
Iām not an expert by any means. Media Bros is great. I have seen the best results with Chemtek W-1, although I was reading that different input factors give various results in the final product.
Can someone with more experience please chime in here?
Media broās is a good media, it needs a very capable extract artist at the helm. The course grind makes for a new set of challenges. Move through it to quick and your shit out of luck. You need to go slooooow!
Input makes the difference
If running fire - w1 or b80 (if w1 is to expensive for yah). B80 will still turn out some fire, but the terp preservation from w1 to b80 is quite astonishing.
@bigoilco
Chemtek w1
ph of 3
hands down best but expensiveā¦ best to run fire with, also great for crystallization
B80
ph of 7
Great for everything, especially shatter
Perform 6000
ph of 3
For lesser quality oil, seems to strip flavonoids
T5 and silica
This one takes time to get the mix right
8 Likes
I have wanted to ask this for weeks but didnt have the courage, i thought i would be attacked with spoons.
What about CRX - CRY ? @FicklePickle
I have been offered a sample but just need to pay the postage. ( its on next months budget )
1 Like
Crx is a good media, the course grind can be a real pain at first though. Never tried it with fire going in. So I canāt provide any insight on quality of the extract from the media (smokewise).
CRY media has more silica in it. This would be great for really terrible bio. Iām going to try some CRY today and will show you a picture
2 Likes
I had a whole bag I left at my old lab, fuck a whole box full of media 
3 Likes
Do you have a website or a phone number for B80?
If you need a bunch ebay is your best bet
@Killa12345 sells it too
I think best value vacs sells it as well
6 Likes
The triple P @Killa12345 Pleasureable Powder Plug 
4 Likes
so does chemtek lol everybody got dated powders now
man we need to make riddle out the secret to w1
that fools humble about everything he doesā¦gotta be a doosh in real life 
get the italics I hope ,I love that crazy frucker
2 Likes
Hahahahaha nahh heās actually one of the most solid cats Iāve met in the industry tbh. Iāve done a lot of work with him & he will always be the same as he is on here no doubt. Heās actually funnnier irl 
4 Likes