What do you guys think is the best rosin press for around the 2k price range? Also, is there any stores that have them in stock in Ohio or Michigan? They sold them at all the smoke shops back home, but I haven’t ran into any out here. appreciate any advice would like to start squishing here soon.
Low temp plates scratch and dent 4x7
W/ Strongway 10 Ton bench press
~$1100
Right on you have any suggested places to buy those pieces? Is it fairly easy to manipulate temp/psi?
Lowtemp-plates.com and Amazon they ship quick. And you got a $1000 margin from your $2000 spend for faster shipping
No doubt! Right on I really appreciate the quick response! Looking into it right now.
I’ve heard people complain about the manual hydraulic presses in comparison to the (pneumatic?) Options you don’t crank- have you experienced any problems getting to / maintaining desired psi with the hydraulic? Apologies if this is a noob question. I admittedly have little to no experience with presses.
You will have no problem reaching your desired pressure and keeping it.
I personally prefer to use a hydraulic apposed to pneumatic. The reason behind this is that the handle gives you haptic feed back to the pressure you are using. You can “feel” the sweet spot in the squish. You also really don’t need more than a few tons. The bigger presses just handle the cage better.
It is all personal preference though. You will figure it out as you grow.
That makes sense! Thanks again.
No need to spend a couple of grand. Dabpress make great press’s with awesome price ranges. I personally built mine for around 500.00. I have a 4x7 caged plate system with a 10 ton strongway table top press. Below is the Dabpress website with all the information you will need to have success.
You can make some killer products out of a budget press as long as you got good starting material.
Ran on a $385 set up
$300 4x7plate+pid combo
$150 shop press (I got it for $85 on sale)
Dude that jar looks like just INSANE fire, well done!
Anyone rock the DabPress? It’s like 1/3 the cost of lowtemp.
I can only find good reviews, but it’s mostly reddit bois.
Not sure if he’s a Reddit Boi, but
No you will not find me on ANY SOCIAL MEDIA I have a life! I am the cat that left the bad review on their E-Nail it will not hold temp, It bounces 40 degrees totally not cool. Anyway I do recommend their Rosin Press’s and theirs a ton of good information on their website. This my take on Rosin Press’s theirs’s Pure Pressure’s Pike’s Peak which takes all the basic guess work out the equations and once dialed in it will repeat the process. Now with the 500.00 to 750.00 you do all the equations on paper and come up with your own sop on the different strains you run.
But your user name says you’re the dawg.
I’ve seen some used sasquaches, possibly even here, for around $1800…
I’ve seen people randomly selling their PurePressure’s too lately. If you are not in a rush, you can probably find some decent used equipment.
Hell yeah I appreciate all the info everyone. I’m not in a rush, so if anyone happens across this thread and has used equipment, definitely hit me up! Sounds like I’ll probably end up going with the low temp set up eventually if I don’t find anything used.
Hell yeah man I follow your pics in the rosin thread all your squishes look amazing. Sounds like I’ll go with the lowtemp unless a killer deal on something used pops up.