If anyone knows how to remove dirty fluid and fill in with new fluid Message me need fixed willing to pay.
Located in Los Angeles California
Delete. I was thinking “delta t solutions” in Temecula. “Delta t syatems” is an entirely different company.
What temp are you running
At 209 Celsius.
Yeah this delta t systems inc company is in Wisconsin.
Do you know what fluid is currently in the system?
Paratherm
Help anyone. Thanks.
1 Like
You can buy a new fluid and cycle it til you think it’s good and do a final fluid change. Or you could buy a fluid system cleaner like Duratherm cleaning products page, cycle that, then put new fluid in.
Draining should be done from the drain plug or the lowest accessable point. If your system is large and intricate you may have to drain, then cycle with the return going into your waste to cycle out the system jackets and anything that might be hiding in them.
3 Likes
Need helping doing that. Don’t know how to do any of that man. That’s why I’m willin to pay.
2 Likes
Love to help, not local anymore
Damn.
Do you have a manual? Have you called for support?
Not sure. We contacted company to try have them fly out and fix this problem we had but price there charging us is way too high man.
What’s it attached to?
If it’s simple enough I could walk your tech with the strongest ability on your team through it.
1 Like
It’s attached to our big distallitation machines.
Figured as much, the one I used was on an old school CTS KD10. That’s a bit much for a phone call, sorry. Idk if helderpad is a thing anymore but one of the local companies may be able to help, like scisol, or helderpad, but I think the fee you’re talking about would be similar with either of these two local companies.
Okay thanks.