That thing is compete trash. Give it back asap. The promise of filling 100+ carts at a time is garbage. The needles clog, the oil drips everywhere, its more of a headache than a help. Thing is a turd even after you " calibrate" it properly… Granted, I haven’t used that thing in almost a year, so they may have made some fundamental changes to the operating system of the machine that I am not aware of. That being said, TDI (Thompson Duke) have solid machines and amazing customer service that can get the job done in roughly the same amount of time when you know what you’re doing. My company started with TD machines tried the 710 shark and collectively decided against making the switch for our use and stuck with TD
2 Likes
How can you possibly blame the customers. I have so much anger right now. Your company has been selling machines that dont do that job end of story. The count below is very much correct. Your company is very good at talking about filling 100 carts each time but the question is how accurate is each fill, how often does the machine fuck up and create a mess. I can sell you a pot that you can put oil into and it can easily fill 100 carts in seconds you but I’m not going to talk to you about the mess , clean up time or anything like that. You completely fabricate your numbers to make New comers to the cart industry believe that they can fill 1000s of carts per hour.
I bought your 710shark and it is honestly the worst machine you can possibly by. I had to put in an extra 5k in upgrades because your air pressure system is junk. Now I heard you had upgraded your system and I had another friend buy in including the capping unit. Guess what it’s complete trash and so are your cove carts. Multiple clogging issues, air holes not been cut right and shitty customer service. Nothing has changed with your company since I have unfortunately crossed paths with it. Maybe your just a cog in the machine and you haven’t actually run the machines your self and you believe all the ridiculous numbers they tell you to push sales but really if you give a shit about your integrity I would start looking to Thompson Dule for a job because those guys are on point.
The one shot systems are also out performing your 100 shot unit. Also if there are any issues it’s only going to be with 1 cart not 100. The amount of cleaning with your machine negates any benefits of using your machine. Can you tell me how many units have you filled personally
2 Likes
Happy to help with any questions you might have. Just don’t buy the 710 shark. You will regret it.
1 Like
We would be happy to help you get your machine back up and running. We understand your frustration but I believe that we can resolve the issues that you are having. We promise you that the machine can do exactly what we say it can. We can set up a trouble shooting call to figure out what is going on and get it operational.
It’s a piece of trash. Go thompson duke.
1 Like
Lol is that the reason I paid 5k to get the machine operational ?? Because of your wonderful customer service , maybe you can help me “calibrate” the machine correctly. Why is it that everyone here says the machine is trash are we all wrong ? Honestly I know it’s not your fault you just got the poor end of the stick trying to come here and rep a shitty brand. The cove carts are crap too. If anyone here has any positive things to say about the 710 shark please state them here.
I can honestly say after we have done our upgrades that the machine can pour 100 very quickly but then there is going to be a lot of work with the screwing but thanks to Thompson Duke that’s not really and issue. If you don’t have the money for the Thompson Duke then check out vapebit.com for a super cost effective way to cap1500-2000 per hour.
The capping machine offered by convectium is also crap and you have to buy the cove carts (maybe it will still work with other carts that cap carts). Now if you know anything about carts you would never do this because once it’s capped closed you can’t remove the top. So let’s say you have some underfilled and you cap them well guess what there’s no going back and now you just look like an idiot trying to explain to people why this batch wasn’t filled correctly and that the machine and carts you use doesn’t allow you to make any changes so this is what you got. Very fast way to lose business but guess what that doesn’t really effect convectium because by the time you figure this out and have listened to all their help about calibrating the machine correctly and dialing it in you will be past the point where you can return it.
For clarity I don’t use the capping carts and this is feedback from others who did. If your fresh into this industry and have a little capital convections looks like it’s got all the bells and whistles to get you going but it’s honestly the worst decision you can make.
You can say all you want about old machines and constantly improving but the fact is if you have a shitty foundation you have a shitty foundation it’s doesn’t matter what new editions your bring out the core of the company needs to be fixed.
4 Likes
For what it is worth, again I apologize for the issues that you have experienced with Convectium. We would love to remedy the situation. Would you be willing to hop on a phone call to discuss more about your poor experience with Convectium? This way we can discuss possible solutions to your problems with our equipment.
You can reach me on my cell, 949-606-4536 or at my email, shane@convectium.com.
Looking forward to hearing from you.
Shane McRae
Business Development @ Convectium
1 Like
Trash don’t buy, you will fully regret losing lots of $ and time…
Go with Thompson duke or buy the fifty shot
1 Like
Hello,
We manufacture filling and capping machines. There are photos and videos on our Instagram page (@GreenLeafRobotics) and I would be glad to send more information or set up a live demo. My email is warner@GreenLeafRobotics.com.
Thanks,
Ben Warner, founder Green Leaf Robotics
My company recently got a 710 Shark filling machine and man is it a game changer. It definitely put the Thompson duke we were using to shame. All I can say is that make sure you get properly trained up on the shark, and you will have no issues and really make your life a hell of a lot easier. I highly recommend. We are looking at getting another one and possibly the capping machine they offer to really have the full automation set. Anyone have any info on the capping machine?
Show us a video. 
2 Likes
I was waiting so long for that damn capping machine. The 710 shark is cool it’s just so cheap feeling for something we spent 17,500 on
1 Like
also had a client interested in one of these but now i’m thinking otherwise seeing this thread. So Thompson Duke seems to be king, does anyone have experience w any other fillers/cappers?
I’m working with the capping machine with ccells works great
Thompson duke is definitely not king, they just swapped from plastic to glass for their res. I think their largest res size is 250 ml
And 710 is not king either lmfaoooo 100 needles is a design flaw.
There is no king in cart filling its a power vacuum
3 Likes
I bet the hsw unimatic is faster. Ever buying a couple of those I don’t even care about a filing machine.
I thought the duke was the pinnacle until I talked to someone who actually owned one 
1 Like
any qma designed auto shooter on the way? or any chance of the hand shooter coming back in stock?
1 Like
Yes actually. I see last night that i was debited for a box of guns, so i assume they will be here in the next 5 days or so.
There are still a few mini res’ and thanks to @square_root_pharms I have a place to direct people for hot pads while i wait for mine to come in.
So probably next week I can do a mini sale again for a day and go out of stock
3 Likes
can it handle doing tinctures and capsules too? i saw a couple videos of it on IG and that thing is an absolute unit. What sizes are the res it looked like there was a couple different?
Put me down in line!