Too hot.
4 watts is where we want to be now.
2 Likes
Do you use live resin? that will need lower temp& lower volt like 2.7v or 3.0V
Whatever you have to do to get to 4 watts will be fine. I favor more ohms vs lowering voltage. More wire generally means more even heat.
4 Likes
The metallic film printing tech is going to take off for sure, some call it 4th and 5th gen tech.
About 3 to 4 companies I know doing them so far, so will be nice to try this version. Sadly its in disposables due the size and tech involved.
1 Like
Kungfu did a good thing with a refillable, rechargeable disposable though. Super cute little vape.
ours is great as well, one my client sell kungfu as well, but he said ours is the best compare to kungfu and happyhead. Maybe you can try out ours.
device samples are available.
I sent you my info have you mailed me a sample yet?
@AlphagreenSusan You asked about my company in that email and Iāll just go ahead and tell you here. I am general manager and lab director of a vertical soil to sale cannabis company in NorCal
1 Like
yes, Samples were sent, tracking # will be updated to you by email
1 Like
I concur. Iāve been trying to explain to Chinese vape manufacturers for over 5 years now. LOW TEMP !!!
Itās a must. Majority of vape manufacturers come from a NICOTINE juice background/mindset. They ASSUME high vapor production only achieved by high tempsā¦INCORRECT.
Viscosity !!! plays a huge role. Terps matter alsoā¦ (Helps w viscosity and achieve HIGH vapor production at very low temps)
Problem is MOST are just middle men or sales and do NOT understand. Many of them lie which ruins everything. They say w/e to get the sale. Language barrier and definitely a culture barrier.
@ VAPE COMPANIES BE HONEST!!!
If not your just wasting everyoneās time INCLUDING your own. Long term relationships.
Long story longā¦I CONCUR 
4 Likes
Weather someone is using live resin or distillate or solventless should all be treated the same. Itās about VISCOSITY and terpene %'s.
High temps are NOT good for any cannabis oil vape. 3.0v is usually to high even when at a higher resistance (ohms)
Iāve tried to tell yāall this a few years ago. Reach out to the manufacturer and explain. IF you made a high quality low temp vape you would get many sales and continue to get them.
Thereās STILL many opportunities b/c manufacturers donāt understand it yet. They keep changing designs but still same WAY TOO HOT vape. Ruins the oil.
anyways hope yāall figure it out. I do like the ad12 from yāall. (the latest low temp version)
1 Like
But i think low temp is not for all oil, we try low temp for some clients (good brands), they think vapor is too small. some clients say it can warm up the oil enough.
So maybe we need to test out with different oil.
what i know is live resin need low temp
There are many large brands that donāt understand yet. Just b/c theyāre big and successful doesnāt mean they understand.
(No disrespect to them just saying)
Itās about viscosity. You can still achieve high vapor production at lower temps.
Many variables but itās all about viscosity.
And most batteries make good tasting oil taste bad. Itās b/c itās too much electricity flowingā¦too much heat.
Thereās a sweet spotā¦ Not too hot not too cold
When more brands recognize the values of incorporating real cannabis derived terpenes and understand viscosity matters mostā¦ the low temp batteries are going to be big.
Anything at or above 3.0 v will be obsolete
Iām going to make a post about all this sometime soon.
2 Likes
Watts up in this thread mAh Ohmies?
8 Likes
Thanks for your all info.
We will work on that , and tell these info to our engineer.
2 Likes
You said the same thing 2-3 years ago when I told you this. Lol hopefully yāall tell someone and atleast start offering lower temps.
I know majority are just salesā¦but tell your engineer to message me. I have Snapchat and Whatsapp. And we can use translator app to communicate.
Iāve spoke to engineers in the pastā¦thereās some camps making low temp but very few.
Take care and thank you.
If you werent so cheap and went to manufacturers like smoore and celoh, youād have found what you were looking for. Its like you are looking for engineers at a bus stop and mad at the bus stop for not having what you need.
The problem is you
3 Likes
I donāt have $10-$20k to piss away with DISHONEST engineers. They lie also. Gotta find decent camp to rock with. Hard to find in the vape world
The problem is scammy DISHONEST biz tactics. Idc to tell you all the relationships and convos Iāve had in the past w MANY different vape camps.
I also donāt give a tiny bit of a crap what you ASSUME about me. You donāt know me.
I mean COMMON sense tells most ppl vape companies are dishonest scammy salesmen.
IF that were NOT the case then vapes wouldnāt ruin decent oilā¦they do b/c most companies are cheap and short sighted.
But I know you donāt want to have an intelligent Convoā¦your just looking to fussā¦I donāt have a gf anymore ā¦Iām abstinent ā¦why would I argue and fuss with you? Hun
1 Like
@Realterpsmatter ask @Dannywarbucks about the low temp configuration of the Kungfu Vapes
TMI perhaps for a convo about vape hardware?
But then again what do I know 
As you wereā¦
1 Like
I have to say that our engineers are very professional, who work in this industry almost 10 years, worked for different big companies, and also have many successfull projects.
Alphagreen will always offer high quality products combining customersā demands.