Ethanol extraction w/ Colorado Extraction Systems- 250 L/week

[cyclopath]

the only way you’re going to get that math done in time is to do it yourself. if you do it in public, you can probably get the critiques & assists you need.

we’re mostly helpful

1. how hard are you running? ie is a day 8, 10, 12, or 24hrs?

2. at 10lb a pop, how many CUPs must you runneth over?
   (or are you looking at a CUP30?)

3. how much liquor is that?

4. so how many spray vaps?

what does that leave you for crude on a weekly basis?

etc…

@QGA will recommend a WFE for distillate rather than an SPD. ymmv.

6 hours on the spd

Usually I run it around 10 ^-4 torr on heads, you need to work off the volitiles with seporate pump. Once you can pull your shortpath down to around .75 torr you can start backing and heating your diffusion pump, once your diff pump is running you can slowly valve the low side vaccum off and throttle on to the diffusion pump/backing pump. Once your distillation is complete you valve off the high vaccum side and back on to the rough pump.