5 Sided Heating Pads System.
Temperared Glass 20mm plus with sight tempered glass 12mm.
Chamber 5mm at least thickness solid.
We make solid door system to hold on it.
Its heavy beast king oven
5 Sided Heating Pads System.
Temperared Glass 20mm plus with sight tempered glass 12mm.
Chamber 5mm at least thickness solid.
We make solid door system to hold on it.
Its heavy beast king oven
Legitimately interested if it can pull to full vac without sucking a door seal in. I donât even really care how well it heats
I would like to see a video of the chamber with the cover/insulation removed and under full vacuum. 5mm is going to deflect like mad. We would use 1"x2" solid bar every 2 feet to reinforce something that big. Also, acrylic would be more appropriate for the door because it wonât shatter/explode if it deflects too far
Outer Size:810 (W) 810(D) 1770mm(H) around.
Letâs say that glass panel in the front is 30"x 66", thatâs nearly 30,000lbs acting on the door at full vacuum. Iâve been in front of 1" thick stainless doors with reinforcing ribs on doors this size that sucked seals in
20mm is deisgned inside tempered glass door attached the chamber.
12mm is second protection safety. (acrylic solid like a paper).
Vacuum is fine under 5mm (actual thickness CHAMBER).
Low temperature
We tested it with 400C its will be hot and a little bend.Under <100C its fine.
Our New Door system with Dual Door Lock to make it seal better.
Left Position with 3 Heavy Duty Hinge (30 bolts hold on it,Solid).
![]()
Acrylic bonded to the glass is good, thank you. Still would think 5mm is a bit thin, does it have reinforcement? Oven looks nice, not trying to be an asshole or anything. Iâd like to turn one into a lyophilizer
good idea.
Vacuum Freeze Dryer 0.6M2 we do previously in USA.
if its like our 16CF BHO Vacuum Oven (The compressor will be huge). ![]()
I would just attach an external condenser to the vacuum oven, if the oven is well enough insulated it will work acceptably for de-icing improperly frozen material
Possily we can make a oven for your design.
thank you again if you are available. ![]()
just dm
Im just gonna turn my 2 car garage into a vac oven.
I donât see how thatâs racist. I donât see how an off handed remark makes anyone affiliated with nazis
⌠My itâs my AutismâŚ
I think that was a pretty good joke. But from experience food oil without a cold trap will clog the vacuum pump. I fucked up a 12cfm two stage pump trying to purge brownie mixâŚ
Bro. Hey donât even have adequate pumps to final test these units. They using cheap china 2cfm pumps that canât even maintain a vacuum last the air leaks.
You mean take customers ideas and run with them for personal gain. If you knew shit about our industry or products you wouldnât be asking people to give you work like that.
Fyi. Donât forget to tell everyone how inefficient heated walls are at that size. What did the customer who gave you this project deny it when they realized the shelving isnât warmed??
Seriously. Over there itâs a thing of pride to screw over americans. They also will do literally everything under the sun to cut corners and costs. Even at the safety of others. Including thier own workers.

Except when it comes to the ccp virus. They hit a true long lasting winner there.

To be honest, this is badass.
If it comes with legitimate listing and labeling and can be demonstrated to work properly then hell yeah.
Also the best waterless showers