Used 6" Pope For Sale

$145k Turn-Key 6" Pope
Comes with discharge and feeding pump upgrades.

If interested email me with questions or pictures.
Lead times for Pope are insane right now, pick this up Right Now before someone else does!




Zack Langford
Sr. Account Manager
zack@scisolinc.com

6In Pope Breakdown
Quantity Item
1 “Six-inch Molecular Still complete with variable speed drive mechanism (wetted parts 316 S.S.), self- supporting still stand, standard glass still body, glass internal condenser, 4-L glass graduated feed and degasser flask with stopper, 5-L glass distillate receiver flask, 5-L glass residue receiver flask, glass cold trap, 316 S.S. wiper retainer, Teflon wiper blades, 120 VAC, 50/60 Hz”
1 “Metal band heater set for 6"” glass still body with high temperature cordset, ceramic insulators, ‘J’ thermocouple and insulating jacket, installed. For temperatures up to 375 degrees C (240 VAC, 50/60 Hz, 8400 w)"
1 “Digital temperature controller with automatic tuning of proportional band, integral time and derivative time parameters. Setpoint and process displays. (maximum output rating: 240 VAC, 50/60 Hz, 35A) (Note: provided with 40A fuse, 240 VAC, 1 PH, 50a plug)”
1 500 ml receiver flask for smaller batches.
1 1000 ml receiver flask.
1 2-L receiver flask.
1 5-L receiver flask.
1 “External condenser with 24/25 stopper for 6"” still."
2 “Multiple flask receiver, rotatable, includes 4 - 500ml flasks”
4 “Heat controller for non-critical feed/degasser flask or heat tracing tape applications. Manual intervalometer adjustment, no temperature feedback or display. (Maximum output rating: 120 VAC, 50/60 Hz, 12 A)”
3 “Heat tracing tape for feed inlet or product outlet sections. Silicone covered, chemical and moisture resistant. Easily applied and removed (120 VAC, 50/60 Hz, 415 W), 1/2"” wide by 96"" long."
1 “Silicone rubber heater and type J thermocouple for 6-L feed and degasser flask (120 VAC, 50/60 Hz, 650 W)”
1 “Mechanical rotary vane vacuum pump system for medium range (to 0.05 Torr), with S.S. fittings for attachment to 6"” Wiped-Film Still; 14.7 CFM free air displacement. Includes oil mist eliminator and vacuum tubing. 3/4 HP, 120 or 240 VAC, 50/60 Hz"
1 “Manual bleed valve assembly for controlling and venting vacuum. Includes mounting on vacuum pump.”
1 “Vacuum gauge, Pirani type, range 0.001 Torr to 1000 Torr (120 VAC, 50/60 Hz). Highly recommended for efficient processing.”
1 “6"” still replacement parts kit, including gear drive belt, spare Viton O-rings and gasket."
1 “1 kW tempered water circulator for use with internal condenser, 120 VAC, 50-60 Hz, temperature set points from -35 to 150°C, includes 7L reservoir, PID temperature control and all necessary tubing for attachment to a 6” still system.”
1 “1 kW tempered water circulator for use with external condenser, 120 VAC, 50-60 Hz, temperature set points from -35 to 150°C, includes 7L reservoir, PID temperature control and all necessary tubing for attachment to a 6” still system.”
1 “1,440 W general purpose heating gun. Includes spreader nozzle, reducing nozzle and carrying case.”
1 “Immersion chiller for use with 4” or 6” glass cold trap, temperature down better than -80°C for protection of the vacuum pump, 120 VAC, with rigid coil probe.”
1 “Three Pump System to include: 1 Ea. 40208-H3-189F, Positive displacement gear pump with heavy duty mechanical seal and Teflon elastomers. For use with a 6"” still system. Includes variable speed motor controller, heating, and all necessary tubing, fittings, drain/prime valves, and back pressure valve for vacuum operation. Electric heat tracing and intervalometer controller also included for feed line and pump head for maintaining fluid viscosity. Also includes mechanism for mounting standard glass degasser flask on side of stand w/connections to feed pump and special double stopcock stopper for vacuum and venting. 1 Ea. 40208-H5-189D, 6"" discharge pump for distillate, positive displacement gear pump w/heavy duty mechanical seal and Viton elastomers. Includes variable speed motor controller, heating and all necessary tubing, fittings, drain/prime valves and back pressure valve for vacuum operation. Electric heat tracing and intervalometer controller are also included for discharge line and pump head for maintaining fluid viscosity. 1 Ea. 40208-H5-189DR, 6"" discharge residue pump, positive displacement gear pump w/heavy duty mechanical seal and Viton elastomers. Includes variable speed motor controller, heating and all necessary tubing, fittings, drain/prime valves and back pressure valve for vacuum operation. Electric heat tracing and intervalometer controller are also included for discharge line and pump head for maintaining fluid viscosity."

Is this pope still available for purchase ?