550gCrude was decarbing in a mineral oil bath and blew over the top and tipped over.
I need to figure out how to fix it, clearly will now be put in the distillate bin, but I was hoping maybe a methanol LLE would pull my cannabinoids.
Any tips?
550gCrude was decarbing in a mineral oil bath and blew over the top and tipped over.
I need to figure out how to fix it, clearly will now be put in the distillate bin, but I was hoping maybe a methanol LLE would pull my cannabinoids.
Any tips?
Winterize it, more then likely you can get it to precipitate like that.
So dilute with methanol or ethanol and put it in dry ice over night?
Yes then filter through some sort of media
A quick Google search says it freezes at -4, you can probably use a regular freezer
Celite 545 fine? I ordered some aluminum oxide cause I was planning on trying some methanol winterization and I saw most folks were using that but i have celite on hand
Celite is what I use
I’ll post update when I have one. Thanks man.
You may be able to separate it with direct distillation, depending on mineral oil boiling point.
I’ll be distilling it no matter what
https://www.labdepotinc.com/p-59940-pyrex-round-media-storage-bottles.php
https://www.amazon.com/BriskHeat-1000-1-Silicone-Griffin-4-2-4-46/dp/B00UV2FU20/
so it won’t happen again
I like your style!
Did you get the mineral oil out with dry ice and methanol?
just had to winterize and filter, used ethanol
i had no idea i was actually just making homemade viscosity blend. who would have thunk it.
At only a fraction of the cost!