Indofabs C.R.C & bho color remediation tek.



From top to bottom
Activated Alumina
Bleaching clay

I wasn’t sure what to use so I threw it all in there. My next attempt I’m just gonna use celite and B80. The bag of B80 was super cheap if that gets the job done I’ll be pretty happy. I’m gonna order some silica 60 and play with that too.


I ran the same stuff before one came out soupy af one shatter like a mf…only thing i changed was the type of buchner i used…if vacumn is not strong enough ull end up with fine sediment in ur extract or it will come out a soup…all the good stuff will remain adsorbed on the clay and cellite


Regardless of filter pore size?


What are u using?


1-3 um over a 5 um sintered disk, only back pressure.


Ive only gone to 22 um …maybe u are going too steep…i guess just try it out see what happens…however i used 8 micron and 22 um and didnt notice any difference in consistency or color


Not my best but figured I’d take one of those photos


That looks amazing!


GreAt work,


Looks a Win there ^^^^^^^^^





Looked like a warm acetone wash in the beforebefore pic :joy:


Some of our adsorbants are rated to 20 um particle size


That’s so rad


Its 3 year old trim that was left in a warehouse and forgotten about i figured if it clean that up it can clean anything up.


So I realized the sintered disk is getting clogged at the bottom . I’ve separated the disk from touching media all together with coffee filter . Still got clogged . I’m pretty sure it’s the disk all together . Can I use silicate for flow ?


Looks like top shelf now :metal:


You should try cleaning it out and see if that helps. I haven’t used a disc yet in any of my filtration, I’m just using papers


And u set that media directly on papers…what’s size paper do u let touch the media?

And everyone gets a paper or just first media


What did you use in what order? Holy smokes that’s crazy