Condenser is the core component of high-low temperature all-in-one machine, low-temperature coolant circulating pump and other equipment. It can convert steam or gas into liquid form and quickly separate the heat from it to make the equipment operate normally. However, in the process of use, the condenser is often not cooled.
Because the condenser has been separating heat during operation, its temperature is very high. High temperature will lead to a series of problems, resulting in non refrigeration. When there is a problem, we should first turn off the power supply of the equipment and wait for the temperature of the condenser to drop. When checking, please wear labor gloves to avoid hurting yourself or damaging the condenser.
We should first check whether the condenser power line is damaged. If so, please replace the power line with the power removed and wrap it with electrical tape. If it is not the problem of the line, please check the fan blade, because if you keep rotating, the fan blade will inevitably have some damage or stains. If there is any damage, please replace the blade. If there is any stain, please wipe it with a dry soft cloth.
In addition to the above problems, the condenser will attract some small sundries to the heat dissipation plate due to the high temperature, so it needs to be cleaned regularly with a brush. Although there is a small chance of condenser pipeline leakage, if it does, replace the pipeline immediately.
When the condenser is not cooled, how to solve it?
I believe you will know how to solve it after reading this article.
