How many uses do you guys usualky get out if Your n2 tanks? And what size tanks?
What size extractor machine?
50lb tank of n2 gets me 1.5-2 months of use running a 4lb extractor 4 times a week. 2x2lb columns, only bumping 4-5 times per column.
A 300 cubic foot 2500 psi cylinder will move 800 lbs of gas from a 100lb solvent tank at -40
We usually get k or t sized cylinders, they last 1.5-2 months depending on the work flow(6-10 runs per day 5 days per week). Keep in mind we recycle our n2, your mileage will vary.
How do you recover n2?
Vent it into a tank id assume
Hi,
our cls recycles the charge.We use two solvent tanks to accomplish this.
We inject and run passively, then at then end we use a pump to move everything to the receiving tank. after we reload the material we run it the opposite way.
It depends on a lot of details. Crc? Dewaxing? System used? What consisdency extract are u going for. But I usually get a 30$ refill and it lasts about 5 to 7 runs on a machine running 10 lbs of dryer material w dewaxing and a crc
Only for dewax through crc
I forget the cu ft of my tank. It’s One size up from a 22 cu ft. It lasts me 6-8 runs. Only 12 bucks to get filled.