Px1 steel - 8k
Julabo fp50 chiller and julabo water heater- 7k
GC5000 gas compressor- 7k
710Shark w/ 3,000 Jupiter carts- 2k/2.5k
Welch CRV pro 8 vac pump- 1k
AI rotary evap setup- throw me an offer
1 Like
Located in Missouri, would do a bundle deal if interested. Can ship or available for pickup anytime
hows the cart filler work?
ive never used it personally but it looks like it fills about 100 carts in 60seconds~
looks like a decent machine, havent really looked up any reviews on it.
I ran one for 2.5 years. It is clunky, and if you bend one needle you must take the whole plate off to replace the one needle. It requires readjustment on the x,y axis pretty frequently between batches, but once you get all 100 needles aligned perfectly (you need to have a very solid jig) it will work pretty well to get out volume. The y axis adjustment knob ended up snapping off and I emailed, called, and submitted a ticket again and could not get anyone at Convectium to respond to me. I also could not find the needles that they use on their website, and the sharp needle tips are not easy to find, or cheap.
Also, expect a minimum of 50 -70g loss to the Oil Basin/needles/filling cavity as the needles cannot get down far enough to reach the bottom of the basin.
It will work, I filled 150k+ carts in it, but once its done, you will be on your own for support / maintenance.
Buyer be warned.
1 Like
much appreciated. will not be getting one of these haha
1 Like